Features:• Sturdy, compact design• Rear time - set knob• Clip on hanger• Precise quartz crystal• High stability • 2-year warranty • 3-post lengths for different face thicknesses. Specifications: • Uses one AA battery, not included• Rated voltage: 1.5V DC• Operating voltage range: 1.2V to 1.7V DC• Motor: stepping and self-starting• Operating temperature range: -10°C to +50°C • 10 mm shaft thickness, fits standard 1⁄2" hole in clock face • 2-1⁄8" high x 2-1⁄8" wide x 1⁄2" thick Includes: • Rubber cushion • Hanger • Brass washer • Mounting nut • Cap nut and gold color hour, minute and sweep second hands. 5/16" Brass bushing length, 5/8" Total Post length, fits faces up to 1/4" thick.

Features:• Sturdy, compact design• Rear time - set knob• Clip on hanger• Precise quartz crystal• High stability • 2-year warranty • 3-post lengths for different face thicknesses. Specifications: • Uses one AA battery, not included• Rated voltage: 1.5V DC• Operating voltage range: 1.2V to 1.7V DC• Motor: stepping and self-starting• Operating temperature range: -10°C to +50°C • 10 mm shaft thickness, fits standard 1⁄2" hole in clock face • 21⁄8" high x 21⁄8" wide x 1⁄2" thick Includes: • Rubber cushion • Hanger • Brass washer • Mounting nut • Cap nut and gold color hour, minute and sweep second hands. 13/16" Brass bushing length,1- 1/8" Total Post length, fits faces up to 3/4" thick.

Hold clock movements when regulating and making adjustments. Grooved brackets are adjustable up to 11” (279 mm). Two leveling screws are in base.

Holds inner coil of mainspring when adjusting or forming to fit the barrel arbor. Stepped nose design, with one round and one concave jaw, allows smooth looping. Overall length 4-1⁄2" (114 mm).

For winding hole end clock mainsprings. Has three different size hooked arbors for most spring sizes. Length 4” (102 mm). Used in bench vise.

For cleaning of precision parts and small gears. Removes surplus oils, loose dirt, grime, grease, smudges and finger prints.

With polished blades. Overall length 4-3⁄8" (110 mm).

Compact, convenient wrench for waterproof cases. With tempered pins and easy to use adjusting wheel. Measures 2-5⁄8" x 1-1⁄8" x 1⁄2" (67 x 29 x 12.7 mm).

Steel blade with knife edge. Large grip for extra control.

"Especially designed for Rolex oyster cases and adaptable for use with the famous L-G wrench. Will open all Rolex waterproof cases. Six knurled rings accurately interlock with the edges on genuine Rolex cases. Diameter of rings: 18.5, 20.2, 22.5, 26.5, 28.3 and 29.5 mm. Sturdy frame fits any bench vise. Adjustable case holder, built into base of frame, accommodates all size cases. Made in USA."

Swiss made. Opens almost all types of waterproof cases with four sets of pins which are easily removed and replaced. Precision tool made for hard use. Handle and body are chrome-plated. Packaged in plastic case that holds wrench and pins.

Will not mar watch cases. Opens to accept all size waterproof cases.

Has plastic posts to prevent marring. Posts are removable and can be set into different positions for different cases. Opens and closes with large knurled knob. Plastic frame fits into bench vise.

Four plastic posts prevent damage. Posts can be set in different positions to hold various cases.

Ideal for closing snap-back watch cases, installing bezel rings and friction inserting mineral crystals. Sturdy metal press makes battery changing easy by eliminating the difficulty of closing cases. Includes 14, two-sided dies, for a total of 28 sizes.Will not scratch.

Removes and inserts crystals without disassembling the watch. Effortlessly remove and insert any round unbreakable crystal without taking the watch apart or removing the bezel. Eliminates all rings, wrenches or pliers and the brass fingers will not mar the crystal. The gripping force can never lose strength because the fingers are mechanically operated. Access to the dial and hands is instantaneous and the works of one piece cases can be laid bare in seconds. A platform is provided to grip a new crystal for inserting into the watch. Economy lift, standard

Plastic dies in sizes: 40, 42.5,45, 47.5, 50, 52.5, 54, 55, 56 and 57 mm.

Removes,measures and inserts all types of spring bars. Ends of tool aremade of tempered steel with one end flat and the other pointed to permit necessary work. Plastic handle has millimeter scale for measuring and selecting the proper fitting bar.

Removes and inserts all types of spring bars. Tempered steel with two tips; one large and forked and the other reversible, small forked or pointed. Knurled handle provides firm grip.

One end is forked and the other is straight. Measures 5-1⁄8" long.

Watch band sits in clamp. Large knob makes it easy to turn and pin is pushed out. Standard model is supplied with 2 removable spacers for different thickness band sizes. Supplied with 0.6, 0.8 and 1 mm pins.

Kit is complete with hammer, 0.8mm pin remover, 1mm pin remover and bracelet holder. Removers include 2 replacement tips. THIS KIT HAS A PLASTIC HOLDER.

Use to remove links from watch bands and bracelets. Measures approximately 2" x 2" x 1".

Fast and easy way to remove link pins. Includes pins: 0.6, 0.8 and 1 mm.

Handle with 3 tips: 0.6, 0.8 and 1 mm.

Reversible brass holder will take all shapes and sizes up to 12-1⁄2" lignes.

One side takes watches up to 18 lignes and the other is for smaller watches. Room for clearance of curved plates and winding stems.Well made with guide pins. Swiss made.

The aluminum case holder holds all types of cases when removing backs. Reversible and made of heavy duty aluminum for durability.

Spring operated. Plastic posts. 36 mm capacity.

Clear plastic cover and 2 trays, one is compartmentalized and one is not. Measures 3-5⁄8" diameter and 2-1⁄8" high.

V-slot slips between hub of staff and seat of roller. Slight pressure on sides of tool is sufficient to lift roller from balance seat. Extra fine jaws permit use on both small and standard sizes.

Prevents scratching. Used for opening and closing cases and while making adjustments.

Kit Contains: luminous powder, varnish, thinner, oiler and 1 round tray. Mix the required quantity of powder and varnish with the thinner until you have the required consistency. Non-radioactive. Contents 2gm.

For pocket watches. Nickelled.

Removes all sizes of cannon pins easily, as well as hands on larger watches. Has sturdy jaws and side springs. Pusher blocks have long strokes.

Revolving turret, with four plungers of different diameters, supports the center post. Removes stubborn hands on gauges and meters, as well as those on watches and clocks, will not touch the dial.

Turret with four plungers uses center post as support to remove hands, without touching the dial. Very useful for stop watches and curved dials.

Removes all sizes easily. With sturdy jaws and side springs.

Allows the pivots to be straightened without breaking due to a control device as well as a screw fitted with a stop. 41 Jewelled holes diam. 0.07 - 0.15 mm. Progression 0.025 mm. Detailed operating instructions delivered with each tool.

Consists of eight dies covering the range from 1.00 mm to 3.00 mm in sizes listed below. Also included: a die holder, adjustable tap holder, eight sets of three right taps (total 24) and a fitted hardwood case. This set is for clocks, meters and similar sized instruments. German quality.

Repairs quartz analog and digital circuitry as well as any other fine wire circuits with a minimum of time and effort. Eliminates long drying times. One minute set up time required. Kit includes .05 fluid oz. (1.5 ml) bottle of Circuit Maker® and an applicator.

Unbreakable mainsprings require a specially designed barrel arbor hook not found on conventional type mainspring winders. Set of 7 sizes 3-3⁄4"L to 12”L

Used for winding movements with two piece winding stems.

Cuts smooth, clean holes in leather watchbands. Plated steel with contoured handle for comfort. Overall length is 5" (127 mm).

Sturdy, quick acting tool for removing all types of hands from watches and instruments. Hands are removed by pushing downward on the plunger-type handle. Center post acts as a guide and holds hands after removal. Imported.

The screw on this puller exerts controlled pressure to force tiny wheels, gears and clock hands away from the post without damaging. Absolutely a must for repairing or modifying railroad rolling stock, clock repair, and slot car motor gear removal. Overall Height: 1-3/4". Post is 7/16" diameter. Jaw frame is 1" wide and jaws adjust to a 7/16" maximum opening.

Plunger opens and closes jaws. Strong spring action holds crown firm while winding. Saves wear and tear on fingers. Swiss made.

Replacement pins for Chain Link Remover Model 59080. Consists of 1 each 0.6, 0.8 and 1 mm pins.