 Ball-shaped wood swivel handle fits palm of hand, making it useful for setting, reaming, tapping, etc.Tool come with 2 chucks which open respectively from 0 to .089" (0 to 2.3 mm) and .13 to .239" (3.1 to 6 mm). $14.82 |  Steel collet is set into hollow brass handle with screw chuck. Capacity 0 to .028" (0 to .71 mm), overall length 3 1/8" (79 mm). $15.19 |
 With large free wheeling head, making it suitable for drilling, tapping, using as a screwdriver, etc. Comes with two double-ended collets, one in screw chuck and the other stored in the handle. Capacity 0 to .125" (0 to 3.2 mm), overall length 3 1/2" (89 mm). $17.95 |  Economical pin vises with steel chucks. Capacity 0 to .047" (0 to 1.19mm), overall length 4" (102 mm) $18.78 |
 Economical pin vises with steel chucks. Capacity 0 to .059" (0 to 1.5mm), overall length 4 1/2" (114 mm) $18.78 | ![PIN VISE DOUBLE END 4-1/4" 0-.099 CAPACITY](https://s.yimg.com/aah/yhst-86144623803941/pin-vises-double-end-4-1-4-34-0-099-capacity-20.gif "PIN VISE DOUBLE END 4-1/4" 0-.099 CAPACITY") Different size steel collets are mounted in both ends of hollow handle. Capacity 0 to .099" (0 to 2.5 mm), overall length 4 1/4" (108 mm). $35.22 |
 Has two steel chucks with spare chuck held in end of hollow brass handle. Will not roll off bench. Capacity 0 to .079" (0 to 2.0 mm), overall length 3 3/4" (95 mm). $19.74 |  Tool steel collets grip firmly when screw chuck is tightened. Handles are hollow to permit holding of long wires. Body is stepped, with the small portion knurled, so that it can be rotated between fingers. Capacity 0-0.40". $20.16 |
 Tool steel collets grip firmly when screw chuck is tightened. Handles are hollow to permit holding of long wires. Body is stepped, with the small portion knurled, so that it can be rotated between fingers. Capacity .025" to .062". $21.12 |  A lightweight vise mounted in wood handle. Smooth jaws are 1-1/4" (32 mm) wide and open to 1" (25 mm). Overall length is 6-1/4" (159 mm). $26.99 |
 Knurled ring slides forward to close steel jaws, making it easy to operate with one hand. Handle is hollow. Capacity 0 to .051" (0 to 1.3 mm), overall length 4 1/8" (105 mm). $25.81 |  Tool steel collets grip firmly when screw chuck is tightened. Handles are hollow to permit holding of long wires. Body is stepped, with the small portion knurled, so that it can be rotated between fingers. Capacity .050" to .125". $27.74 |
 Tool steel collets grip firmly when screw chuck is tightened. Handles are hollow to permit holding of long wires. Body is stepped, with the small portion knurled, so that it can be rotated between fingers. Capacity .115" to .188". $30.10 |  Ball-shaped wood swivel handle fits palm of hand, making it useful for setting, reaming, tapping, etc.Tool come with 2 chucks which open respectively from 0 to .089" (0 to 2.3 mm) and .13 to .239" (3.1 to 6 mm). $38.98 |
 With hollow handle and grooved corrugated jaws that open and close by turning handle. Design allows you to hold long wire pieces not possible with regular hand vise. Width of jaws 1/2" (13 mm), overall length 4-3/4" (121 mm). $45.06 |  Spring action handle keeps the serrated jaws open. Jaws are 1-1/4" (32 mm) wide and open to 7/16" (11 mm). The jaws are closed by turning wing screw. Overall length is 3-3/4" (95 mm). $45.70 |
 Serrated, grooved, spring action jaws open and close with large wing nut. Handles are hollow so that long wire will pass through. Two jaw widths are available.This unit opens to 1/4" (6 mm). Overall length is 4-1/2" (114 mm). 1/4" jaw width. $62.20 |  Serrated, grooved, spring action jaws open and close with large wing nut. Handles are hollow so that long wire will pass through. Two jaw widths are available. This unit opens to 1/4" (6 mm). Overall length is 4-1/2" (114 mm). 5/8" jaw width. $62.20 |
 Tool steel collets grip firmly when screw chuck is tightened. Handles are hollow to permit holding of long wires. Body is stepped, with the small portion knurled, so that it can be rotated between fingers. Set of 4 precision pin vises with capacities from 0 to .040", .025" to .062",.050" to .125", and .115" to .188". $79.42 |  Sturdily constructed bench vise with twin guide rods to assure parallel closing and rigidity. Jaws are smooth to prevent marring of soft metals. Body is enameled. Jaws are 2-1/2" (64 mm) wide and open to 2-1/2" (64 mm). Clamp that fits on bench opens to 1-1/4". $91.62 |
 Swivel base permits vise to be positioned in any direction and locked. With twin guide rods to assure parallel operation and rigidity. Smooth jaws will not mar soft metals. With anvil on top. Jaws are 2-1/2" (64 mm) wide and open to 2-1/2" (64 mm). Clamp that fits on bench opens to 1-7/8". $97.69 |  Well made and strong with rust-proof finish. Clamp that fits on bench opens to 1-1/4". Jaws are 1-3/4" (44 mm) wide and open to 1-3/4" (44 mm). $46.33 |
 Completely portable, attaches instantly to any smooth, non-porous surface. Large 3" (76mm), V-grooved iron jaws open to 3" with precision screw action. Universal ball joint rotates vise to any desired working angle. Includes a set of protective rubber jaws. $79.13 |  All steel construction, blackened body, shaft diameter 6.4mm. Comes with 3 collets, 1mm, 2mm, and 3mm. $29.26 |
 With reversible steel collets in each end. Hexagonal heads prevent rolling. Hollow handle and heads made of brass. Capacity is 0 to .125" (0 to 3.2 mm), overall length 4 1/8" (105 mm). $17.40 |  Midget size, hollow handle metal pin vise with screw chuck. Capacity 0 to .020" (0 to .51 mm), overall length 1 7/8" (48 mm). $13.20 |
|