 End of wood handle is bored and reinforced. Can be threaded onto tapered spindles so that small wheels, burs, etc. can be used on larger polishing motors. The chuck opens from .085" to .128" (2.2 to 3.3 mm) so that 3/32" (2.4 mm) and 1/8" (3.2 mm) mandrels will fit. Overall length 3-1/2" (89 mm). $17.58 |  Taper is 1/4" per foot (6 per 305 mm). For use with wheels up to 3" diameter and 1/4" thick, with 1/4" arbor holes. $23.06 |
 Taper is 1/4" per foot (6 per 305 mm). For use with wheels up to 3" diameter and 1/4" thick, with 1/4" arbor holes. $23.06 |  1/4" (6 mm) capacity with short shank. Steel, for right shaft. $38.52 |
 5/32" (4 mm) capacity for right shaft. Brass body with steel knurl. $47.63 |  For tools with 3/32" (2.4 mm) shanks. Steel, for right shaft. $45.55 |
 For right side. Steel. 1/4" Shank. $17.40 |  For wheels up to 2-1/2" diameter and 1/4" thick, with 1/4" arbor hole. $17.40 |
 For abrasive bands, right side. $18.78 |  Designed to fit the right side of Baldor motors. Threads are clear and deep, and the end is pointed. Brass. $68.33 |
 Designed to fit the left side of Baldor motors. Threads are clear and deep, and the end is pointed. Brass. $65.70 |  Designed to fit any tapered shaft motor. Threads are clear and deep, and the end is pointed. Brass. $29.96 |
 Designed to fit any tapered shaft motor. Threads are clear and deep, and the end is pointed. Brass. $29.96 |  Designed to fit any tapered shaft motor. Threads are clear and deep, and the end is pointed. $33.13 |
 Designed to fit any tapered shaft motor. Threads are clear and deep, and the end is pointed. $33.13 |  Abrasive bands are held in place when rubber head is expanded. Made in USA. Brass. $29.96 |
 Abrasive bands are held in place when rubber head is expanded. Made in USA. Brass. $29.96 |  Designed to hold grinding wheel on right side of motors with 1/2" straight shaft. For wheels with 1/2" hole. Steel. $34.38 |
 Brushes with 1/8" (3.2 mm) holes can be threaded onto the hardened steel taper, which can be threaded onto a standard tapered spindle. Handy way to use small setting brushes on polishing motors. $15.06 |  Brushes with 1/8" (3.2 mm) holes can be threaded onto the hardened steel taper, which can be threaded onto a standard tapered spindle. Handy way to use small setting brushes on polishing motors. $15.06 |
 Heavy-duty for right side. 1/16" diameter screw. $13.40 | ![TAPERED SPINDLE FOR 5/8" SHAFT FOR LEFT SIDE SHORT](https://s.yimg.com/aah/yhst-86144623803941/tapered-spindle-for-5-8-34-shaft-for-left-side-short-20.gif "TAPERED SPINDLE FOR 5/8" SHAFT FOR LEFT SIDE SHORT"){kind=small} Short version for use with 472025 dust collector. $17.27 |
![TAPERED SPINDLE FOR 5/8" SHAFT FOR RIGHT SIDE SHORT](https://s.yimg.com/aah/yhst-86144623803941/tapered-spindle-for-5-8-34-shaft-for-right-side-short-20.gif "TAPERED SPINDLE FOR 5/8" SHAFT FOR RIGHT SIDE SHORT"){kind=small} Short for use with 475025 dust collector. $17.27 |  Designed to fit any straight shaft motor. Made with right handed threads and held to shaft with set screws. Threads are clear and deep, and the end is pointed. Steel. $26.34 |
 Designed to fit any straight shaft motor. Made with left handed threads and held to shaft with set screws. Threads are clear and deep, and the end is pointed. Steel. $26.10 |  Designed to fit any straight shaft motor. Made with right handed threads and held to shaft with set screws. Threads are clear and deep, and the end is pointed. Steel. $29.69 |
 Designed to fit any straight shaft motor. Made with left handed threads and held to shaft with set screws. Threads are clear and deep, and the end is pointed. Steel. $29.69 |  Designed to fit any straight shaft motor. Made with right handed threads and held to shaft with set screws. Threads are clear and deep, and the end is pointed. Steel. $30.37 |
 Designed to fit any straight shaft motor. Made with left handed threads and held to shaft with set screws. Threads are clear and deep, and the end is pointed. Steel. $30.37 |  Designed to fit any straight shaft motor. Made with right handed threads and held to shaft with set screws. Threads are clear and deep, and the end is pointed. Steel. $29.00 |
 Designed to fit any straight shaft motor. Made with left handed threads and held to shaft with set screws. Threads are clear and deep, and the end is pointed. Steel. $29.00 |  Designed to fit any straight shaft motor. Made with right handed threads and held to shaft with set screws. Threads are clear and deep, and the end is pointed. Steel. $29.00 |
 Designed to fit any straight shaft motor. Made with left handed threads and held to shaft with set screws. Threads are clear and deep, and the end is pointed. Steel. $29.00 |
|