 Inspired by renowned master modelmaker and educator, Kate Wolf, fills a void in wax products. This wax is slightly flexible with medium hardness and can be carved or machined with the finest details. It can also be fully polished and will withstand considerable handling. This durable repair wax makes it easy to blend built-up and repaired sections. To sensure through bond, melt model where repair wax is to be added. approx. 1-3/16" x 3-9/16". $27.55 |  Inspired by renowned master modelmaker and educator, Kate Wolf, fills a void in wax products. This wax is slightly flexible with medium hardness and can be carved or machined with the finest details. It can also be fully polished and will withstand considerable handling. This durable repair wax makes it easy to blend built-up and repaired sections. To sensure through bond, melt model where repair wax is to be added. approx. 1-3/16" x 3-9/16". $27.55 |
 Inspired by renowned master modelmaker and educator, Kate Wolf, fills a void in wax products. This wax is slightly flexible with medium hardness and can be carved or machined with the finest details. It can also be fully polished and will withstand considerable handling. Blocks measure 3-9/16" x 3-9/16" x 2-3/8". 1 lb. block. $37.81 |  Inspired by renowned master modelmaker and educator, Kate Wolf, fills a void in wax products. This wax is slightly flexible with medium hardness and can be carved or machined with the finest details. It can also be fully polished and will withstand considerable handling. Assortment contains five slices per box and is assorted from 1/8" to 1" in thickness. $37.81 |
 Inspired by renowned master modelmaker and educator, Kate Wolf, fills a void in wax products. This wax is slightly flexible with medium hardness and can be carved or machined with the finest details. It can also be fully polished and will withstand considerable handling. Ideal for securing stones. Flows at 173 degrees farenheit. 3/16" square x 5" long. $23.29 |  Inspired by renowned master modelmaker and educator, Kate Wolf, fills a void in wax products. This wax is slightly flexible with medium hardness and can be carved or machined with the finest details. It can also be fully polished and will withstand considerable handling. Ideal for creating detail on carving waxes. Apply molten relief wax on the surface of the wax model. Comes in a 2 oz. tin. $31.30 |
 Ideal for final touch-up of wax imperfections. Can be easily scraped off for a smooth finish. Flows at 163 degrees farenheit. $24.94 |  Saw off a slice to carve coin holders, pendants, earrings, medallions, buckles, bangles and bracelets. Ideal for lathe turning to make carved napkin rings, chessmen, salt and pepper shakers, etc.Green: Cannot be flexed Approximate melting Point is 240F (116 C). Purple: Some flexibility. Approximate melting Point is 240F (116 C). Blue: Will bend 90 degrees in 1/8" (3.2 mm) thickness. 3-9/16" x 2-3/8". $33.40 |
 Saw off a slice to carve coin holders, pendants, earrings, medallions, buckles, bangles and bracelets. Ideal for lathe turning to make carved napkin rings, chessmen, salt and pepper shakers, etc.Green: Cannot be flexed Approximate melting Point is 240F (116 C). Purple: Some flexibility. Approximate melting Point is 240F (116 C). Blue: Will bend 90 degrees in 1/8" (3.2 mm) thickness. 3-9/16" x 2-3/8". $33.40 |  Saw off a slice to carve coin holders, pendants, earrings, medallions, buckles, bangles and bracelets. Ideal for lathe turning to make carved napkin rings, chessmen, salt and pepper shakers, etc.Green: Cannot be flexed Approximate melting Point is 240F (116 C). Purple: Some flexibility. Approximate melting Point is 240F (116 C). Blue: Will bend 90 degrees in 1/8" (3.2 mm) thickness. 3-9/16" x 2-3/8". $33.40 |
 Saw off a slice to carve coin holders, pendants, earrings, medallions, buckles, bangles and bracelets. Ideal for lathe turning to make carved napkin rings, chessmen, salt and pepper shakers, etc.Green: Cannot be flexed Approximate melting Point is 240F (116 C). Purple: Some flexibility. Approximate melting Point is 240F (116 C). Blue: Will bend 90 degrees in 1/8" (3.2 mm) thickness. 3-1/6" x 4-1/16". $33.40 |  Saw off a slice to carve coin holders, pendants, earrings, medallions, buckles, bangles and bracelets. Ideal for lathe turning to make carved napkin rings, chessmen, salt and pepper shakers, etc.Green: Cannot be flexed Approximate melting Point is 240F (116 C). Purple: Some flexibility. Approximate melting Point is 240F (116 C). Blue: Will bend 90 degrees in 1/8" (3.2 mm) thickness. 3-1/6" x 4-1/16". $33.40 |
 Saw off a slice to carve coin holders, pendants, earrings, medallions, buckles, bangles and bracelets. Ideal for lathe turning to make carved napkin rings, chessmen, salt and pepper shakers, etc.Green: Cannot be flexed Approximate melting Point is 240F (116 C). Purple: Some flexibility. Approximate melting Point is 240F (116 C). Blue: Will bend 90 degrees in 1/8" (3.2 mm) thickness. 3-1/6" x 4-1/16". $33.40 |  Saw off a slice to carve coin holders, pendants, earrings, medallions, buckles, bangles and bracelets. Ideal for lathe turning to make carved napkin rings, chessmen, salt and pepper shakers, etc.Green: Cannot be flexed Approximate melting Point is 240F (116 C). Purple: Some flexibility. Approximate melting Point is 240F (116 C). Blue: Will bend 90 degrees in 1/8" (3.2 mm) thickness. 2-5/8" x 5-1/2". $33.40 |
 Saw off a slice to carve coin holders, pendants, earrings, medallions, buckles, bangles and bracelets. Ideal for lathe turning to make carved napkin rings, chessmen, salt and pepper shakers, etc.Green: Cannot be flexed Approximate melting Point is 240F (116 C). Purple: Some flexibility. Approximate melting Point is 240F (116 C). Blue: Will bend 90 degrees in 1/8" (3.2 mm) thickness. 2-5/8" x 5-1/2". $33.40 |  Saw off a slice to carve coin holders, pendants, earrings, medallions, buckles, bangles and bracelets. Ideal for lathe turning to make carved napkin rings, chessmen, salt and pepper shakers, etc.Green: Cannot be flexed Approximate melting Point is 240F (116 C). Purple: Some flexibility. Approximate melting Point is 240F (116 C). Blue: Will bend 90 degrees in 1/8" (3.2 mm) thickness. 2-5/8" x 5-1/2". $33.40 |
 Saw off a slice to carve coin holders, pendants, earrings, medallions, buckles, bangles and bracelets. Ideal for lathe turning to make carved napkin rings, chessmen, salt and pepper shakers, etc.Green: Cannot be flexed Approximate melting Point is 240F (116 C). Purple: Some flexibility. Approximate melting Point is 240F (116 C). Blue: Will bend 90 degrees in 1/8" (3.2 mm) thickness. 2-1/4" x 7-1/2". $33.40 |  Saw off a slice to carve coin holders, pendants, earrings, medallions, buckles, bangles and bracelets. Ideal for lathe turning to make carved napkin rings, chessmen, salt and pepper shakers, etc.Green: Cannot be flexed Approximate melting Point is 240F (116 C). Purple: Some flexibility. Approximate melting Point is 240F (116 C). Blue: Will bend 90 degrees in 1/8" (3.2 mm) thickness. 2-1/4" x 7-1/2". $33.40 |
 Saw off a slice to carve coin holders, pendants, earrings, medallions, buckles, bangles and bracelets. Ideal for lathe turning to make carved napkin rings, chessmen, salt and pepper shakers, etc.Green: Cannot be flexed Approximate melting Point is 240F (116 C). Purple: Some flexibility. Approximate melting Point is 240F (116 C). Blue: Will bend 90 degrees in 1/8" (3.2 mm) thickness. 2-1/4" x 7-1/2". $33.40 |  Saw off a slice to carve coin holders, pendants, earrings, medallions, buckles, bangles and bracelets. Ideal for lathe turning to make carved napkin rings, chessmen, salt and pepper shakers, etc.Green: Cannot be flexed Approximate melting Point is 240F (116 C). Purple: Some flexibility. Approximate melting Point is 240F (116 C). Blue: Will bend 90 degrees in 1/8" (3.2 mm) thickness. 1-3/4" X 12-1/8". $33.40 |
 Saw off a slice to carve coin holders, pendants, earrings, medallions, buckles, bangles and bracelets. Ideal for lathe turning to make carved napkin rings, chessmen, salt and pepper shakers, etc.Green: Cannot be flexed Approximate melting Point is 240F (116 C). Purple: Some flexibility. Approximate melting Point is 240F (116 C). Blue: Will bend 90 degrees in 1/8" (3.2 mm) thickness. 1-3/4" X 12-1/8". $33.40 |  Saw off a slice to carve coin holders, pendants, earrings, medallions, buckles, bangles and bracelets. Ideal for lathe turning to make carved napkin rings, chessmen, salt and pepper shakers, etc.Green: Cannot be flexed Approximate melting Point is 240F (116 C). Purple: Some flexibility. Approximate melting Point is 240F (116 C). Blue: Will bend 90 degrees in 1/8" (3.2 mm) thickness. 1-3/4" X 12-1/8". $33.40 |
 Saw off a slice to carve coin holders, pendants, earrings, medallions, buckles, bangles and bracelets. Ideal for lathe turning to make carved napkin rings, chessmen, salt and pepper shakers, etc.Green: Cannot be flexed Approximate melting Point is 240F (116 C). Purple: Some flexibility. Approximate melting Point is 240F (116 C). Blue: Will bend 90 degrees in 1/8" (3.2 mm) thickness. Consists of 2 1-5/16" X 11-1/4" bars. $33.40 |  Saw off a slice to carve coin holders, pendants, earrings, medallions, buckles, bangles and bracelets. Ideal for lathe turning to make carved napkin rings, chessmen, salt and pepper shakers, etc.Green: Cannot be flexed Approximate melting Point is 240F (116 C). Purple: Some flexibility. Approximate melting Point is 240F (116 C). Blue: Will bend 90 degrees in 1/8" (3.2 mm) thickness. Consists of 2 1-5/16" X 11-1/4" bars. $33.40 |
 Saw off a slice to carve coin holders, pendants, earrings, medallions, buckles, bangles and bracelets. Ideal for lathe turning to make carved napkin rings, chessmen, salt and pepper shakers, etc.Green: Cannot be flexed Approximate melting Point is 240F (116 C). Purple: Some flexibility. Approximate melting Point is 240F (116 C). Blue: Will bend 90 degrees in 1/8" (3.2 mm) thickness. Consists of 2 bars measuring 1-5/16" X 11-1/4" each. $33.40 |  Introductory kit contains three bars, one of each color/hardness. Bars are (3 1/2" x 1 1/2" x 1 1/4") (89 x 38 x 32 mm) and weigh approximately 1/6 lb. (76 g) each. $26.99 |
 Various shapes and colors for trial use. Also handy for having around in case an odd piece is needed. 11 pieces assorted. $29.24 |  Various shapes and colors for trial use. Also handy for having around in case an odd piece is needed. Professional kit, approximately 1 lb. $36.83 |
 Used for making models to be reproduced by the lost wax casting process. They can be sawed, filed or carved. Will stand rough handling and will not soften in your hands. Available in three degrees of hardness, designated by color, and in a variety of shapes. Green: Cannot be flexed Approximate melting Point is 240F (116 C). Purple: Some flexibility. Approximate melting Point is 240F (116 C). Blue: Will bend 90 in 1/8" (3.2 mm) thickness. Approximate melting Point is 240F (116 C). 3-3/4" x 1-1/8" x 1-1/8". $40.55 |  Used for making models to be reproduced by the lost wax casting process. They can be sawed, filed or carved. Will stand rough handling and will not soften in your hands. Available in three degrees of hardness, designated by color, and in a variety of shapes. Green: Cannot be flexed Approximate melting Point is 240F (116 C). Purple: Some flexibility. Approximate melting Point is 240F (116 C). Blue: Will bend 90 in 1/8" (3.2 mm) thickness. Approximate melting Point is 240F (116 C). 3-3/4" x 1-1/8" x 1-1/8". $28.55 |
 Used for making models to be reproduced by the lost wax casting process. They can be sawed, filed or carved. Will stand rough handling and will not soften in your hands. Available in three degrees of hardness, designated by color, and in a variety of shapes. Green: Cannot be flexed Approximate melting Point is 240F (116 C). Purple: Some flexibility. Approximate melting Point is 240F (116 C). Blue: Will bend 90 in 1/8" (3.2 mm) thickness. Approximate melting Point is 240F (116 C). 3-3/4" x 1-1/8" x 1-1/8". $28.55 |  Used for making models to be reproduced by the lost wax casting process. They can be sawed, filed or carved. Will stand rough handling and will not soften in your hands. Available in three degrees of hardness, designated by color, and in a variety of shapes. Green: Cannot be flexed Approximate melting Point is 240F (116 C). Purple: Some flexibility. Approximate melting Point is 240F (116 C). Blue: Will bend 90 in 1/8" (3.2 mm) thickness. Approximate melting Point is 240F (116 C). 3-1/2" x 3-1/2" x 1-3/8". $23.58 |
 Used for making models to be reproduced by the lost wax casting process. They can be sawed, filed or carved. Will stand rough handling and will not soften in your hands. Available in three degrees of hardness, designated by color, and in a variety of shapes. Green: Cannot be flexed Approximate melting Point is 240F (116 C). Purple: Some flexibility. Approximate melting Point is 240F (116 C). Blue: Will bend 90 in 1/8" (3.2 mm) thickness. Approximate melting Point is 240F (116 C). 3-1/2" x 3-1/2" x 1-3/8". $23.58 |  Used for making models to be reproduced by the lost wax casting process. They can be sawed, filed or carved. Will stand rough handling and will not soften in your hands. Available in three degrees of hardness, designated by color, and in a variety of shapes. Green: Cannot be flexed Approximate melting Point is 240F (116 C). Purple: Some flexibility. Approximate melting Point is 240F (116 C). Blue: Will bend 90 in 1/8" (3.2 mm) thickness. Approximate melting Point is 240F (116 C). 5-3/4" x 3-1/2" x 1-3/8". $38.84 |
 Used for making models to be reproduced by the lost wax casting process. They can be sawed, filed or carved. Will stand rough handling and will not soften in your hands. Available in three degrees of hardness, designated by color, and in a variety of shapes. Green: Cannot be flexed Approximate melting Point is 240F (116 C). Purple: Some flexibility. Approximate melting Point is 240F (116 C). Blue: Will bend 90 in 1/8" (3.2 mm) thickness. Approximate melting Point is 240F (116 C). 5-3/4" x 3-1/2" x 1-3/8". $38.84 |  Used for making models to be reproduced by the lost wax casting process. They can be sawed, filed or carved. Will stand rough handling and will not soften in your hands. Available in three degrees of hardness, designated by color, and in a variety of shapes. Green: Cannot be flexed Approximate melting Point is 240F (116 C). Purple: Some flexibility. Approximate melting Point is 240F (116 C). Blue: Will bend 90 in 1/8" (3.2 mm) thickness. Approximate melting Point is 240F (116 C). 5-3/4" x 3-1/2" x 1-3/8". $38.84 |
 Designed to simplify the construction of bracelets. Available in either blue (regular), green (hard), and purple (medium). Approximate melting Point is 240F (116 C). 3-1/8" x 2-5/8" x 4-5/8". $30.84 |  Green color cannot be flexed, purple color has some flexibility, blue will bend 90 degrees in 1/8" thickness. All have a 240 degree melting point. Used for making models to be reproduced by the lost wax casting process. They can be sawed, filed or carved. Will stand rough handling and will not soften in your hands. Available in three degrees of hardness, designated by color, and in a variety of shapes. Easy-to-cut ring tubes for designing your own rings. Many rings can be made from each 6" (152 mm) long tube. Pre-drilled holes are 5/8" (16 mm) in diameter. 7/8" OD. $21.18 |
 Green color cannot be flexed, purple color has some flexibility, blue will bend 90 degrees in 1/8" thickness. All have a 240 degree melting point. Used for making models to be reproduced by the lost wax casting process. They can be sawed, filed or carved. Will stand rough handling and will not soften in your hands. Available in three degrees of hardness, designated by color, and in a variety of shapes. Easy-to-cut ring tubes for designing your own rings. Many rings can be made from each 6" (152 mm) long tube. Pre-drilled holes are 5/8" (16 mm) in diameter. 1-1/16" OD. $17.00 |  Green color cannot be flexed, purple color has some flexibility, blue will bend 90 degrees in 1/8" thickness. All have a 240 degree melting point. Used for making models to be reproduced by the lost wax casting process. They can be sawed, filed or carved. Will stand rough handling and will not soften in your hands. Available in three degrees of hardness, designated by color, and in a variety of shapes. Easy-to-cut ring tubes for designing your own rings. Many rings can be made from each 6" (152 mm) long tube. Pre-drilled holes are 5/8" (16 mm) in diameter. 7/8" OD. $21.18 |
 Green color cannot be flexed, purple color has some flexibility, blue will bend 90 degrees in 1/8" thickness. All have a 240 degree melting point. Used for making models to be reproduced by the lost wax casting process. They can be sawed, filed or carved. Will stand rough handling and will not soften in your hands. Available in three degrees of hardness, designated by color, and in a variety of shapes. Easy-to-cut ring tubes for designing your own rings. Many rings can be made from each 6" (152 mm) long tube. Pre-drilled holes are 5/8" (16 mm) in diameter. 1-1/16" OD. $21.18 |  Green color cannot be flexed, purple color has some flexibility, blue will bend 90 degrees in 1/8" thickness. All have a 240 degree melting point. Used for making models to be reproduced by the lost wax casting process. They can be sawed, filed or carved. Will stand rough handling and will not soften in your hands. Available in three degrees of hardness, designated by color, and in a variety of shapes. Easy-to-cut ring tubes for designing your own rings. Many rings can be made from each 6" (152 mm) long tube. Pre-drilled holes are 5/8" (16 mm) in diameter. 1-1/16" OD. $19.79 |
 Green color cannot be flexed, purple color has some flexibility, blue will bend 90 degrees in 1/8" thickness. All have a 240 degree melting point. Used for making models to be reproduced by the lost wax casting process. They can be sawed, filed or carved. Will stand rough handling and will not soften in your hands. Available in three degrees of hardness, designated by color, and in a variety of shapes. Easy-to-cut ring tubes for designing your own rings. Many rings can be made from each 6" (152 mm) long tube. Pre-drilled holes are 5/8" (16 mm) in diameter. 1-1/16" OD. $19.74 |  Green color cannot be flexed, purple color has some flexibility, blue will bend 90 degrees in 1/8" thickness. All have a 240 degree melting point. Used for making models to be reproduced by the lost wax casting process. They can be sawed, filed or carved. Will stand rough handling and will not soften in your hands. Available in three degrees of hardness, designated by color, and in a variety of shapes. Easy-to-cut ring tubes for designing your own rings. Many rings can be made from each 6" (152 mm) long tube. Pre-drilled holes are 5/8" (16 mm) in diameter. 1-1/16" OD. $21.18 |
 Green color cannot be flexed, purple color has some flexibility, blue will bend 90 degrees in 1/8" thickness. All have a 240 degree melting point. Used for making models to be reproduced by the lost wax casting process. They can be sawed, filed or carved. Will stand rough handling and will not soften in your hands. Available in three degrees of hardness, designated by color, and in a variety of shapes. Easy-to-cut ring tubes for designing your own rings. Many rings can be made from each 6" (152 mm) long tube. Pre-drilled holes are 5/8" (16 mm) in diameter. 1-1/16" OD. $21.18 |  Green color cannot be flexed, purple color has some flexibility, blue will bend 90 degrees in 1/8" thickness. All have a 240 degree melting point. Used for making models to be reproduced by the lost wax casting process. They can be sawed, filed or carved. Will stand rough handling and will not soften in your hands. Available in three degrees of hardness, designated by color, and in a variety of shapes. Easy-to-cut ring tubes for designing your own rings. Many rings can be made from each 6" (152 mm) long tube. Pre-drilled holes are 5/8" (16 mm) in diameter. 1-5/16" high x 1-3/16" wide. $19.80 |
 Green color cannot be flexed, purple color has some flexibility, blue will bend 90 degrees in 1/8" thickness. All have a 240 degree melting point. Used for making models to be reproduced by the lost wax casting process. They can be sawed, filed or carved. Will stand rough handling and will not soften in your hands. Available in three degrees of hardness, designated by color, and in a variety of shapes. Easy-to-cut ring tubes for designing your own rings. Many rings can be made from each 6" (152 mm) long tube. Pre-drilled holes are 5/8" (16 mm) in diameter. 1-5/16" high x 1-3/16" wide. $19.44 |  Green color cannot be flexed, purple color has some flexibility, blue will bend 90 degrees in 1/8" thickness. All have a 240 degree melting point. Used for making models to be reproduced by the lost wax casting process. They can be sawed, filed or carved. Will stand rough handling and will not soften in your hands. Available in three degrees of hardness, designated by color, and in a variety of shapes. Easy-to-cut ring tubes for designing your own rings. Many rings can be made from each 6" (152 mm) long tube. Pre-drilled holes are 5/8" (16 mm) in diameter. 1-5/16" high x 1-3/16" wide. $21.18 |
 Green color cannot be flexed, purple color has some flexibility, blue will bend 90 degrees in 1/8" thickness. All have a 240 degree melting point. Used for making models to be reproduced by the lost wax casting process. They can be sawed, filed or carved. Will stand rough handling and will not soften in your hands. Available in three degrees of hardness, designated by color, and in a variety of shapes. Easy-to-cut ring tubes for designing your own rings. Many rings can be made from each 6" (152 mm) long tube. Pre-drilled holes are 5/8" (16 mm) in diameter. 1-1/8" high x 1-5/8" wide. $21.18 |  Green color cannot be flexed, purple color has some flexibility, blue will bend 90 degrees in 1/8" thickness. All have a 240 degree melting point. Used for making models to be reproduced by the lost wax casting process. They can be sawed, filed or carved. Will stand rough handling and will not soften in your hands. Available in three degrees of hardness, designated by color, and in a variety of shapes. Easy-to-cut ring tubes for designing your own rings. Many rings can be made from each 6" (152 mm) long tube. Pre-drilled holes are 5/8" (16 mm) in diameter. 1" high x 1" wide. $21.18 |
 Green color cannot be flexed, purple color has some flexibility, blue will bend 90 degrees in 1/8" thickness. All have a 240 degree melting point. Used for making models to be reproduced by the lost wax casting process. They can be sawed, filed or carved. Will stand rough handling and will not soften in your hands. Available in three degrees of hardness, designated by color, and in a variety of shapes. Easy-to-cut ring tubes for designing your own rings. Many rings can be made from each 6" (152 mm) long tube. Pre-drilled holes are 5/8" (16 mm) in diameter. 1-1/8" high x 1-5/8" wide. $21.18 |  Green color cannot be flexed, purple color has some flexibility, blue will bend 90 degrees in 1/8" thickness. All have a 240 degree melting point. Used for making models to be reproduced by the lost wax casting process. They can be sawed, filed or carved. Will stand rough handling and will not soften in your hands. Available in three degrees of hardness, designated by color, and in a variety of shapes. Easy-to-cut ring tubes for designing your own rings. Many rings can be made from each 6" (152 mm) long tube. Pre-drilled holes are 5/8" (16 mm) in diameter. 1-1/8" high x 1-1/8" wide. $21.18 |
 Green color cannot be flexed, purple color has some flexibility, blue will bend 90 degrees in 1/8" thickness. All have a 240 degree melting point. Used for making models to be reproduced by the lost wax casting process. They can be sawed, filed or carved. Will stand rough handling and will not soften in your hands. Available in three degrees of hardness, designated by color, and in a variety of shapes. Easy-to-cut ring tubes for designing your own rings. Many rings can be made from each 6" (152 mm) long tube. Pre-drilled holes are 5/8" (16 mm) in diameter. 1-1/8" high x 1-5/8" wide. $21.18 |  Green color cannot be flexed, purple color has some flexibility, blue will bend 90 degrees in 1/8" thickness. All have a 240 degree melting point. Used for making models to be reproduced by the lost wax casting process. They can be sawed, filed or carved. Will stand rough handling and will not soften in your hands. Available in three degrees of hardness, designated by color, and in a variety of shapes. Easy-to-cut ring tubes for designing your own rings. Many rings can be made from each 6" (152 mm) long tube. Pre-drilled holes are 5/8" (16 mm) in diameter. 7/8" OD. $21.18 |
 Green color cannot be flexed, purple color has some flexibility, blue will bend 90 degrees in 1/8" thickness. All have a 240 degree melting point. Used for making models to be reproduced by the lost wax casting process. They can be sawed, filed or carved. Will stand rough handling and will not soften in your hands. Available in three degrees of hardness, designated by color, and in a variety of shapes. Easy-to-cut ring tubes for designing your own rings. Many rings can be made from each 6" (152 mm) long tube. Pre-drilled holes are 5/8" (16 mm) in diameter. 1-1/16" OD. $21.18 |  Green color cannot be flexed, purple color has some flexibility, blue will bend 90 degrees in 1/8" thickness. All have a 240 degree melting point. Used for making models to be reproduced by the lost wax casting process. They can be sawed, filed or carved. Will stand rough handling and will not soften in your hands. Available in three degrees of hardness, designated by color, and in a variety of shapes. Easy-to-cut ring tubes for designing your own rings. Many rings can be made from each 6" (152 mm) long tube. Pre-drilled holes are 5/8" (16 mm) in diameter. 7/8" od. $19.80 |
 Green color cannot be flexed, purple color has some flexibility, blue will bend 90 degrees in 1/8" thickness. All have a 240 degree melting point. Used for making models to be reproduced by the lost wax casting process. They can be sawed, filed or carved. Will stand rough handling and will not soften in your hands. Available in three degrees of hardness, designated by color, and in a variety of shapes. Easy-to-cut ring tubes for designing your own rings. Many rings can be made from each 6" (152 mm) long tube. Pre-drilled holes are 5/8" (16 mm) in diameter. 1-1/16" OD. $21.18 |  Green color cannot be flexed, purple color has some flexibility, blue will bend 90 degrees in 1/8" thickness. All have a 240 degree melting point. Used for making models to be reproduced by the lost wax casting process. They can be sawed, filed or carved. Will stand rough handling and will not soften in your hands. Available in three degrees of hardness, designated by color, and in a variety of shapes. Easy-to-cut ring tubes for designing your own rings. Many rings can be made from each 6" (152 mm) long tube. Pre-drilled holes are 5/8" (16 mm) in diameter. 7/8" OD. $21.18 |
 Assortment of 5 3-5/8" square slabs in the following thickness: 1-7/8", 11/16", 1-3/8" and two 3/16". $40.24 |  Green color cannot be flexed, purple color has some flexibility, blue will bend 90 degrees in 1/8" thickness. All have a 240 degree melting point. Used for making models to be reproduced by the lost wax casting process. They can be sawed, filed or carved. Will stand rough handling and will not soften in your hands. Available in three degrees of hardness, designated by color, and in a variety of shapes. Easy-to-cut ring tubes for designing your own rings. Many rings can be made from each 6" (152 mm) long tube. Pre-drilled holes are 5/8" (16 mm) in diameter. $39.24 |
 Green color cannot be flexed, purple color has some flexibility, blue will bend 90 degrees in 1/8" thickness. All have a 240 degree melting point. Used for making models to be reproduced by the lost wax casting process. They can be sawed, filed or carved. Will stand rough handling and will not soften in your hands. Available in three degrees of hardness, designated by color, and in a variety of shapes. Easy-to-cut ring tubes for designing your own rings. Many rings can be made from each 6" (152 mm) long tube. Pre-drilled holes are 5/8" (16 mm) in diameter. $39.24 |  Assortment of slices measuring 3-5/8" x 1-1/2" in varying thicknesses. Half-pound assortments thickness from 3/32" to 1/4", 1 lb. assortments are from 3/16" to 1". $32.36 |
 Assortment of slices measuring 3-5/8" x 1-1/2" in varying thicknesses. Half-pound assortments thickness from 3/32" to 1/4", 1 lb. assortments are from 3/16" to 1". $32.36 |  Assortment of slices measuring 3-5/8" x 1-1/2" in varying thicknesses. Half-pound assortments thickness from 3/32" to 1/4", 1 lb. assortments are from 3/16" to 1". $32.36 |
 Assortment of slices measuring 3-5/8" x 1-1/2" in varying thicknesses. Half-pound assortments thickness from 3/32" to 1/4", 1 lb. assortments are from 3/16" to 1". $39.08 |  Assortment of slices measuring 3-5/8" x 1-1/2" in varying thicknesses. Half-pound assortments thickness from 3/32" to 1/4", 1 lb. assortments are from 3/16" to 1". $32.99 |
 Assortment of slices measuring 3-5/8" x 1-1/2" in varying thicknesses. Half-pound assortments thickness from 3/32" to 1/4", 1 lb. assortments are from 3/16" to 1". $40.88 |  Green color cannot be flexed, purple color has some flexibility, blue will bend 90 degrees in 1/8" thickness. All have a 240 degree melting point. Used for making models to be reproduced by the lost wax casting process. They can be sawed, filed or carved. Will stand rough handling and will not soften in your hands. Available in three degrees of hardness, designated by color, and in a variety of shapes. Easy-to-cut ring tubes for designing your own rings. Many rings can be made from each 6" (152 mm) long tube. Pre-drilled holes are 5/8" (16 mm) in diameter. 1" high x 1" wide. $21.18 |
 Green color cannot be flexed, purple color has some flexibility, blue will bend 90 degrees in 1/8" thickness. All have a 240 degree melting point. Used for making models to be reproduced by the lost wax casting process. They can be sawed, filed or carved. Will stand rough handling and will not soften in your hands. Available in three degrees of hardness, designated by color, and in a variety of shapes. Easy-to-cut ring tubes for designing your own rings. Many rings can be made from each 6" (152 mm) long tube. Pre-drilled holes are 5/8" (16 mm) in diameter. 1" high x 1" wide. $21.18 |  Green color cannot be flexed, purple color has some flexibility, blue will bend 90 degrees in 1/8" thickness. All have a 240 degree melting point. Used for making models to be reproduced by the lost wax casting process. They can be sawed, filed or carved. Will stand rough handling and will not soften in your hands. Available in three degrees of hardness, designated by color, and in a variety of shapes. Easy-to-cut ring tubes for designing your own rings. Many rings can be made from each 6" (152 mm) long tube. Pre-drilled holes are 5/8" (16 mm) in diameter. 1-1/8" high x 1-1/8" wide. $20.10 |
 Green color cannot be flexed, purple color has some flexibility, blue will bend 90 degrees in 1/8" thickness. All have a 240 degree melting point. Used for making models to be reproduced by the lost wax casting process. They can be sawed, filed or carved. Will stand rough handling and will not soften in your hands. Available in three degrees of hardness, designated by color, and in a variety of shapes. Easy-to-cut ring tubes for designing your own rings. Many rings can be made from each 6" (152 mm) long tube. Pre-drilled holes are 5/8" (16 mm) in diameter. 1-1/8" high x 1-1/8" wide. $21.18 |  Green color cannot be flexed, purple color has some flexibility, blue will bend 90 degrees in 1/8" thickness. All have a 240 degree melting point. Used for making models to be reproduced by the lost wax casting process. They can be sawed, filed or carved. Will stand rough handling and will not soften in your hands. Available in three degrees of hardness, designated by color, and in a variety of shapes. Easy-to-cut ring tubes for designing your own rings. Many rings can be made from each 6" (152 mm) long tube. Pre-drilled holes are 5/8" (16 mm) in diameter. 1-1/16" OD. $21.18 |