PLASTIC RULER WHITE 6 IN & MM
Graduated in millimeters across the top and 1/16" increments across the lower half. 6 inch length, 1/2" wide
$10.96
Availability: Contact us for availability
35500
PLASTIC RULER WHITE 7 IN & MM
Graduated in millimeters across the top and 1/16" increments across the lower half. 7" length, 9/16" wide.
$10.96
Availability: Contact us for availability
35502
STAINLESS STEEL RULER  6 IN & MM WITH HOLE
Graduated in millimeters across the top and 1/32" increments across the lower half. All graduations are deeply etched. Overall length 6" (150 mm), width 1/2" (12.7 mm).
$11.93
Availability: Contact us for availability
35510
GAUGE FOR BURS
A Swiss-made precision gauge of lightweight metal measures bur diameters in ISO sizes 005 to 045. Ruler on reverse for measuring up to 50 mm, in 1 mm increments.
$10.25
Availability: Contact us for availability
35465
SLIDING CALIPER COLUMBUS STYLE
Economical quality gauge measures in metric and inch. Capacity 5 or 125 mm. Vernier reads to 1/128" and 1/10 mm. Has thumb roller and locking screw. Jaws measure inside and outside and there is a depth gauge in the end.
$15.85
Availability: Contact us for availability
35174
DIVIDER 4 IN
For measuring distances between points and scribing circles or arcs. Spring action. 3-3/8" max opening, 4" legs.
$17.40
Availability: Contact us for availability
35086
SLIDING CALIPER MM&IN CAPACITY 80MM  BRASS
Combination inch and millimeter gauges. Capacity 3" or 80 mm. Graduations by 1/16ths and 1.0 mm. Made of all brass.
$18.76
Availability: Contact us for availability
35156
SLIDING CALIPER MM&IN CAPACITY 60MM
Combination inch and millimeter gauge. Capacity 2 1/4" or 60 mm. Graduations by 1/16ths and 1.0 mm.
$21.82
Availability: Contact us for availability
35152
DIVIDER 6"
For measuring distances between points and scribing circles and arcs.
$21.13
Availability: Contact us for availability
350526
STAINLESS STEEL RULER  6 IN
Has chromed, non-glare finish. Capacity 6", graduated by 1/10ths and 1/100ths on one side and 1/32nds and 1/64ths on the other side.
$23.93
Availability: Contact us for availability
35512
DIVIDER 3 IN
For measuring distances between points and scribing circles or arcs. Spring action. 3-1/4" max opening. 3" legs.
$17.40
Availability: Contact us for availability
35080
DIVIDER 6 IN
For measuring distances between points and scribing circles or arcs. Spring action. 6-3/4" max opening, 6" legs.
$30.52
Availability: Contact us for availability
35092
WIRE GAUGE, DRILL GAUGE, SHEET METAL GAUGE B&S 0-36
American standard for ordering wire and sheet sizes from 0 to 36. Decimal equivalents on the back.
$61.12
Availability: Contact us for availability
35568
CALIPERS DEGREE 1/10MM
Lightweight, sensitive gauges made of polished steel, with easy-to-read brass indexes. Non-adjustable. 1/10mm graduations, 150mm capacity.
$76.33
Availability: Contact us for availability
35012
SLIDING DIAL CALIPER INCH PLASTC
Large 1-1/2" (38 mm) diameter dial makes it easy to read graduations. Jaws measures inside and outside and there is a depth gauge in the end. Available in either metric or inch models. Economical, unbreakable and lightweight. 6 inch capacity x 0.010".
$82.33
Availability: Contact us for availability
35182
SLIDING DIAL CALIPER MM PLASTIC
Large 1-1/2" (38 mm) diameter dial makes it easy to read graduations. Jaws measures inside and outside and there is a depth gauge in the end. Available in either metric or inch models. Economical, unbreakable and lightweight. 152mm capacity x 0.1mm.
$78.67
Availability: Contact us for availability
35184
DIVIDER 3 IN ROUND LEG
For measuring and scribing. Special, high quality construction and finishing. With solid nut.

WARNING: This product can expose you to chemicals including Lead which is known to the State of California to cause cancer.\

For more information go to www.P65Warnings.ca.gov
$116.96
Availability: Contact us for availability
35084
CALIPERS DEGREE 1/10MM 1/12 LINGES
With adjustable point for close tolerance work. 3/4" (19 mm) jaw. Graduations in 1/12 linges and 1/10 mm. Capacity 72 linges and 120 mm.
$83.60
Availability: Contact us for availability
35014
CALIPERS DEGREE 1/10MM WITH ADJUSTABLE POINT
With adjustable point for close tolerance work.
$85.30
Availability: Contact us for availability
35018
IWANSON GAUGE METAL
Precision made, stainless steel. 4 inches long.
$96.06
Availability: Contact us for availability
35186
DIGITAL CALIPER
Made of stainless steel. Measures inside and outside in inches and millimeters. Capacity 0-6 inches with .001" resolution, or 0-150 mm with 0.01 mm resolution. Includes zero set button and depth measuring rod. Protective carrying case and battery included.
$56.63
Availability: Contact us for availability
35180
SLIDING CALIPER BOLEY STYLE STAINLESS STEEL
Millimeter gauge with capacity if 100 mm and vernier reading to 0.1 mm. Cut out jaws for measuring different shapes. With locking lever. Stainless steel.
$125.00
Availability: Contact us for availability
35170
PRECISION STEEL SQUARE 1"
Tool steel with lapped beams and blades. Beams and blades are hardened, ground, and lapped to insure parallelism and straightness. 90 angles inside and out, for close tolerance precise work. 1" Body Size: 2" Length x 3/4" Wide, Tongue Size: 1-1/4"
$30.50
Availability: Contact us for availability
35141
PRECISION STEEL SQUARE 2"
Tool steel, hardened and precision ground edges, lapped beams and blades, beams and blades are hardened, ground, and lapped to insure parallelism and straightness. 900 angles inside and out, for close tolerance measurements and precise work. 2 Body Size: 3" Long X 3/4" Wide, Tongue Size: 2-1/4".
$31.61
Availability: Contact us for availability
35142
PRECISION STEEL SQUARE 3"
Tool steel, hardened and precision ground edges, lapped beams and blades, beams and blades are hardened, ground, and lapped to insure parallelism and straightness. 90 angles inside and out, for close tolerance measurements and precise work. 3 Body Size: 4" Long X 3/4" Wide, Tongue Size: 3-1/4".
$31.94
Availability: Contact us for availability
35143



 

SECURE ORDERING

"Shopping with us is 100% Safe and Secure."



Yahoo! Store uses SSL (Secure Socket Layer) encryption when transmitting certain kinds of information, such as financial services information or payment information. Any time a Yahoo! Store asks for a credit card number during checkout for payment, it will be SSL encrypted. The information you provide will be stored securely on our servers.

The Checkout pages for all Yahoo! Stores are served through a secure https connection using 128-bit SSL v2/v3 encryption. You can see the secure server certificate information for our servers by going to the Order Form page and double-clicking on the locked padlock icon in your browser's status bar (at the bottom of the page for most browsers).