ALLIGATOR CLIPS FOR THIRD HAND
Priced per piece.
$7.38
Availability: Usually ships the next business day
54114
COMBINATION BLOWER & SOLDER OFF BULB
Rubber body with Teflon tip, makes it suitable as a blower or for suctioning excess molten solder.
$15.89
Availability: Usually ships the next business day
54135
TITANIUM SOLDER PICK
Platinum soldering pic with titanium tip and metal handle.
$22.06
Availability: Usually ships the next business day
54774
TUNGSTEN SOLDER PICK WITH HANDLE
Wood handle with sharp pointed tip for placing, holding and positioning solder in just the right place. For platinum soldering with tungsten tip.
$15.48
Availability: Usually ships the next business day
54772
TITANIUM SOLDER PICK WOOD HANDLE
Wood handle with sharp pointed tip for placing, holding and positioning solder in just the right place. For gold and silver soldering with a titanium tip.
$19.84
Availability: Usually ships the next business day
54771
CARBON LARGE CYLINDRICAL
Replacement carbons.
$22.74
Availability: Usually ships the next business day
54057
CARBON LARGE CYLINDRICAL/FLAT
Replacement carbons.
$29.90
Availability: Usually ships the next business day
54058
CARBON SMALL PENCIL
Replacement carbons.
$25.86
Availability: Usually ships the next business day
54055
PUMICE FOR 54120    2-1/2 LBS
$42.42
Availability: Usually ships the next business day
54122
THIRD HAND WITH ROUND BASE
These handy holding devices are available with either round or horseshoe bases. Each are heavy, non- tipping bases equipped with ball joint attachments which can position work at any angle. Cross-locking tweezers and various types of clamps will fit on these bases. Handy for positioning pieces to be joined by solder or adhesive, freeing both hands. Cross-locking, 6-1/2" (165 mm) tweezers closes when released. Mounted on heavy-duty round base.
$35.41
Availability: Usually ships the next business day
54080
THIRD HAND WITH HORSESHOE BASE
These handy holding devices are available with either round or horseshoe bases. Each are heavy, non- tipping bases equipped with ball joint attachments which can position work at any angle. Cross-locking tweezers and various types of clamps will fit on these bases. Handy for positioning pieces to be joined by solder or adhesive, freeing both hands.
$36.61
Availability: Usually ships the next business day
54090
DOUBLE CLAMP  WITH HORSESHOE BASE
These handy holding devices are available with either round or horseshoe bases. Each are heavy, non- tipping bases equipped with ball joint attachments which can position work at any angle. Cross-locking tweezers and various types of clamps will fit on these bases. Handy for positioning pieces to be joined by solder or adhesive, freeing both hands.
$38.87
Availability: Usually ships the next business day
54095
WALL LENK SOLDERING PENCIL
Melts solder in 90 seconds. Perfect for fine jewelry work. Develops 900 degrees farenheit tip temperature to make better solder joints. Pencil type handle is cooler to use and provides better handling and control. For extra tips, see part number 540961.
$38.38
Availability: Usually ships the next business day
540960
THIRD HAND DOUBLE CLAMP WITH ROUND BASE
These handy holding devices are available with either round or horseshoe bases. Each are heavy, non- tipping bases equipped with ball joint attachments which can position work at any angle. Cross-locking tweezers and various types of clamps will fit on these bases. Handy for positioning pieces to be joined by solder or adhesive, freeing both hands.
$49.15
Availability: Usually ships the next business day
54085
CARBON ROUND TAPER
Replacement carbons.
$45.60
Availability: Usually ships the next business day
54054
SOLDERING BOWL
Stainless steel bowl holds workpiece when soldering, leaving both hands free. Mounted on solid base, bowl adjusts in any position for use on any job. Bowl is 4" (102 mm) in diameter and 1-5/8" (41 mm) deep. Comes filled with Therma-Guard (No. 54469) and can also be used with pumice stone.
$55.57
Availability: Usually ships the next business day
540720
CARBON RODS   SET OF 5
Includes carbons: 54.054 - round taper, 54.055 - 2 small pencil, 54.057 - large cylindrical, and 54.058 - large cylindrical/flat.
$80.99
Availability: Usually ships the next business day
54066
ANNEALING PAN 12"  WITH PUMICE
Allows positioning of work while annealing or soldering on a heat reflecting material, such as pumice. Rotates on ball bearings, providing 360 access. Pan is 12" (305 mm) in diameter and comes with 2-1/2 lbs. (1.1 kg) of lump pumice. Shipping weight 6 lbs. (2.7 kg).
$109.49
Availability: Usually ships the next business day
54120
SOLDERING STATION WITH 3X MAGNIFIER
Large work area 12" x 9-1/2" (305 x 241 mm). Fully adjustable and interchangeable holding fixtures. Slotted/grooved jaws to grip unusually shaped items. 3X magnifier for close-up work. Rubber edging to hold the station in place. Note: The surface of the station is not flame or heat resistant. Use No. 54.211 asbestos free soldering board (sold separately) which withstands temperatures up to 3000 F (1649 C) for soldering or torch use.
$118.20
Availability: Usually ships the next business day
54025
PROCRAFT ELECTRIC SOLDERING MACHINE   220 VOLT 7.5 AMPS
No torch or gas tanks needed. Used for hard or soft soldering. Up to 2000 F (1093 C). Demagnetizes watch movements, small instruments and small tools. Low voltage unit is shock resistant. Your hands may safely touch any part of the carbon holders or contact clips.You will find it easy to use this compact, efficient machine for soldering rings, jewelry, spectacle frames or any piece where hard or soft solder is needed. The heat range is acceptable for soldering very light to heavy items. Heat control is easily achieved by turning the selector knob. The heat is produced electrically, without flame, by touching a carbon electrode to the work to be soldered. The current passing through the carbon will heat the object in a matter of seconds. Carbons are copper plated to insure good contact. The large carbon holder can be adjusted to use carbons both horizontally or vertically and is low enough so that both hands can rest comfortably on the bench. Maximum 1000 watts. Soldering machine comes with foot control switch, 54064 - Complete Carbon Stand, 54066 - Set of 5 carbon lead wires, and instructions. 90 day warranty. Shipping weight 21 lbs. Carton size 19" x 14" x 15".
$559.00
Availability: Usually ships the next business day
54050X
PROCRAFT ELECTRIC SOLDERING MACHINE   115V
No torch or gas tanks needed. Used for hard or soft soldering. Up to 2000 F (1093 C). Demagnetizes watch movements, small instruments and small tools. Low voltage unit is shock resistant. Your hands may safely touch any part of the carbon holders or contact clips.You will find it easy to use this compact, efficient machine for soldering rings, jewelry, spectacle frames or any piece where hard or soft solder is needed. The heat range is acceptable for soldering very light to heavy items. Heat control is easily achieved by turning the selector knob. The heat is produced electrically, without flame, by touching a carbon electrode to the work to be soldered. The current passing through the carbon will heat the object in a matter of seconds. Carbons are copper plated to insure good contact. The large carbon holder can be adjusted to use carbons both horizontally or vertically and is low enough so that both hands can rest comfortably on the bench. Maximum 1000 watts. Soldering machine comes with foot control switch, 54064 - Complete Carbon Stand, 54066 - Set of 5 carbon lead wires, and instructions. 90 day warranty. Shipping weight 21 lbs. Carton size 19" x 14" x 15".
$559.00
Availability: Usually ships the next business day
54050
TITANIUM SOLDERING PIC-BLUE HANDLE
Colored metal handles to eliminate contamination of different solders. Titanium is best for precious metals except platinum. 6-3/8" long. Handle has 6 sided end to stop from rolling on the bench.
$14.53
Availability: Usually ships the next business day
54778
TITANIUM SOLDERING PIC-GOLD HANDLE
Colored metal handles to eliminate contamination of different solders. Titanium is best for precious metals except platinum. 6-3/8" long. Handle has 6 sided end to stop from rolling on the bench.
$14.53
Availability: Usually ships the next business day
54779
TITANIUM SOLDERING PIC-RED HANDLE
Colored metal handles to eliminate contamination of different solders. Titanium is best for precious metals except platinum. 6-3/8" long. Handle has 6 sided end to stop from rolling on the bench.
$21.79
Availability: Usually ships the next business day
54780



 

SECURE ORDERING

"Shopping with us is 100% Safe and Secure."



Yahoo! Store uses SSL (Secure Socket Layer) encryption when transmitting certain kinds of information, such as financial services information or payment information. Any time a Yahoo! Store asks for a credit card number during checkout for payment, it will be SSL encrypted. The information you provide will be stored securely on our servers.

The Checkout pages for all Yahoo! Stores are served through a secure https connection using 128-bit SSL v2/v3 encryption. You can see the secure server certificate information for our servers by going to the Order Form page and double-clicking on the locked padlock icon in your browser's status bar (at the bottom of the page for most browsers).