BURNOUT OVEN DIGITAL CONTROL 120 VOLT
Insulated with space-age ceramic fiber for fast heating and cooling at low electrical cost. The firing chamber is 13" W x 13" D x 9" H (33 x 33 x 23 cm), large enough for volume jewelry making. These kilns fire to 1700 F (967 C), so you can also use them for low-fire ceramics, enameling on metal, china painting or glass fusing. A heavy steel case protects the firing chamber for long life and the chamber is supported by a double-layer steel bottom. The base lifts the furnace off the work surface. The door peephole and top vent-hole are sealed with metal covers when not in use. The door remains tightly sealed, even at high temperature, with the spring-loaded latch. Reaches 1000 F (538 C) in 30 minutes. The digital control models use the DTC-800 controller, eliminating the need for a pyrometer. With this feature-packed temperature controller, you can program up to eight ramps (raising or lowering the temperature at the rate you specify) and eight dwells (holding the temperature at the rate you specify) and eight dwells (holding the temperature constant for the length of time you specify). The digital models use a type-K thermocouple, long proven for it's reliability. The controller stores up to six programs even if the power shuts off. The furnace has a one year warranty. The controller has a two year warranty. Shipping weight 135 lbs. Must be shipped by motor freight. (49 kg). This unit requires a 20 amp dedicated line. for 240 volt, see model 22112
$2,200.00
Availability: Usually ships the next business day
22110
BURNOUT OVEN MANUAL CONTROL   120 VOLT
Insulated with space-age ceramic fiber for fast heating and cooling at low electrical cost. The firing chamber is 13" W x 13" D x 9" H (33 x 33 x 23 cm), large enough for volume jewelry making. These kilns fire to 1700 F (967 C), so you can also use them for low-fire ceramics, enameling on metal, china painting or glass fusing. A heavy steel case protects the firing chamber for long life and the chamber is supported by a double-layer steel bottom. The base lifts the furnace off the work surface. The door peephole and top vent-hole are sealed with metal covers when not in use. The door remains tightly sealed, even at high temperature, with the spring-loaded latch. Reaches 1000 F (538 C) in 30 minutes. The manual control models use an infinite control switch with pilot light. A pyrometer hole is drilled in the back of the firing chamber. (Pyrometer not included). The furnace comes with a one-year warranty. A digital controller may be purchased separately and is recommended for burnout in place of the pyrometer. This manual-fire kiln operates without electronics or timers. It uses the infinite control switch to adjust heat output. These switches have been proven reliable over many years of kiln production.

The infinite control switch cycles on and off through a bi-metallic timer. The higher the switch setting, the longer the heating elements stay on during each cycle. When the switch is turned to High, the elements stay on continuously. For most firings, the switches are set on LOW to begin with, then turned up to higher settings. Shipping weight 135 lbs. (49 kg). This unit requires a 20 amp dedicated line. See part number 22116, for 220 Volt.
$2,100.00
Availability: Usually ships the next business day
22114
22O VOLT MANUAL BURNOUT FURNACE
Insulated with space-age ceramic fiber for fast heating and cooling at low electrical cost. The firing chamber is 13" W x 13" D x 9" H (33 x 33 x 23 cm), large enough for volume jewelry making. These kilns fire to 1700 F (967 C), so you can also use them for low-fire ceramics, enameling on metal, china painting or glass fusing. A heavy steel case protects the firing chamber for long life and the chamber is supported by a double-layer steel bottom. The base lifts the furnace off the work surface. The door peephole and top vent-hole are sealed with metal covers when not in use. The door remains tightly sealed, even at high temperature, with the spring-loaded latch. Reaches 1000 F (538 C) in 30 minutes.

The manual control models use an infinite control switch with pilot light. A pyrometer hole is drilled in the back of the firing chamber. (Pyrometer not included). A digital controller may be purchased separately and is recommended for burnout in place of the pyrometer. This manual-fire kiln operates without electronics or timers. It uses the infinite control switch to adjust heat output. These switches have been proven reliable over many years of kiln production.

The infinite control switch cycles on and off through a bi-metallic timer. The higher the switch setting, the longer the heating elements stay on during each cycle. When the switch is turned to High, the elements stay on continuously. For most firings, the switches are set on LOW to begin with, then turned up to higher settings.

The furnace has a one year warranty. Shipping weight 135 lbs. (49 kg). This unit requires a 10 amp dedicated line.
$2,200.00
Availability: Usually ships the next business day
22116
PYROMETER WITH NEEDLE INDICATOR
Used to measure temperatures in burnout ovens. Measure within 98% accuracy, from 0 degrees to 2500 degrees farenheit. Have 5" lead and sheathed 1/8" thermocouple. Can be wall mounted. This unit is an Analog (needle) pyrometer.
$287.60
Availability: Usually ships the next business day
22160
GOLD MELTING FURNACE DIGITAL 1 KILO
Specially designed and constructed for melting metals for casting and alloying of metal. Featuring 2,012 F operating range, heavy duty graphite crucible, precise temperature control, LED on/off indicator light, 1kg capacity, easy to read digital display 110V 50/60 cycle power. 10 amp. Furnace will heat up to gold melting temperature in about 20-25 minutes. Crucible measures 1-1/2" i.d. x 4-1/4" deep. Shipping weight 18 lbs.
$957.60
Availability: Usually ships the next business day
22211
MELTING FURNACE DIGITAL 2 KILO
Specially designed and constructed for melting metals for casting and alloying of metal Featuring 2,012 F operating range, heavy duty graphite crucible, precise temperature control, LED on/off indicator light, 2KG capacity, easy to read digital display 110V 50/60 cycle power. Furnace will heat up to gold melting temperature in about 20-25 minutes. Crucible measures 1-3/4" i.d. x 5-1/2" deep. Shipping Weight 20 pounds. Carton dimensions- 18"X 14 1/2"X11.
$1,300.00
Availability: Usually ships the next business day
22213
CRUCIBLE F/1KG MELTING FURNACE
Special crucible for use with model 22211 and 22213 melting furnace. Measures 1-1/2" i.d. x 4-1/4" deep.
$66.31
Availability: Usually ships the next business day
22216
BURNOUT FURNACE-SMALL 120V
Features an infinite control switch and maximum operating temperature of 2000 degrees farenheit (1093 c). Includes a pre-drilled hole in the back of the chamber for insertion of a thermocouple. Use with a digital or analog pyrometer or digital controller. Elements are exposed in recessed grooves and the swing-style door opens wide for easy flask handling. Base keeps firing chamber off the work surface, so no stand is needed. A peep hole in the door and vent hole on top have metal covers Firing chamber dimensions are 8-1/2" wide x 8-3/4" high and 9" deep.. Outside dimensions are 17-1/4" wide x 17-3/4" high x 18" deep. 120 volt, requires a 20 amp dedicated line.
$1,300.00
Availability: Usually ships the next business day
2207600
BURNOUT FURNACE LARGE 120V
Features an infinite control switch and maximum operating temperature of 2000 degrees farenheit (1093 c). Includes a pre-drilled hole in the back of the chamber for insertion of a thermocouple. Use with a digital or analog pyrometer or digital controller. Elements are exposed in recessed grooves and the swing-style door opens wide for easy flask handling. Base keeps firing chamber off the work surface, so no stand is needed. A peep hole in the door and vent hole on top have metal covers Firing chamber dimensions are 13" wide x 8-3/4" high and 13-1/2" deep.. Outside dimensions are 21-1/2" wide x 19-1/2" high x 23" deep. 120 volt, requires a 20 amp dedicated line.
$1,520.00
Availability: Usually ships the next business day
2207605
GOLD MELTING FURNACE DIGITAL 1 KILO 220 VOLT
Specially designed and constructed for melting metals for casting and alloying of metal. Featuring 2,012 F operating range, heavy duty graphite crucible, precise temperature control, LED on/off indicator light, 1kg capacity, easy to read digital display. THIS UNIT IS 220 VOLT. Furnace will heat up to gold melting temperature in about 20-25 minutes. Crucible measures 1-1/2" i.d. x 4-1/4" deep. Shipping weight 18 lbs.
$957.60
Availability: Usually ships the next business day
22211X
MELTING FURNACE DIGITAL 2 KILO 220 VOLT
Specially designed and constructed for melting metals for casting and alloying of metal Featuring 2,012 F operating range, heavy duty graphite crucible, precise temperature control, LED on/off indicator light, 2KG capacity, easy to read digital display. Furnace will heat up to gold melting temperature in about 20-25 minutes. THIS UNIT IS 220 VOLT. Crucible measures 1-3/4" i.d. x 5-1/2" deep. Shipping Weight 20 pounds.
$1,300.00
Availability: Usually ships the next business day
22213X



 

SECURE ORDERING

"Shopping with us is 100% Safe and Secure."



Yahoo! Store uses SSL (Secure Socket Layer) encryption when transmitting certain kinds of information, such as financial services information or payment information. Any time a Yahoo! Store asks for a credit card number during checkout for payment, it will be SSL encrypted. The information you provide will be stored securely on our servers.

The Checkout pages for all Yahoo! Stores are served through a secure https connection using 128-bit SSL v2/v3 encryption. You can see the secure server certificate information for our servers by going to the Order Form page and double-clicking on the locked padlock icon in your browser's status bar (at the bottom of the page for most browsers).