 Dimensions shown are in the following sequence: Head diameter, head length, shank size. Lengths of shank will vary.
EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE: STANDARD CUT:
(STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.
DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
BEAR BUR CUT (BB) is a double cut bur that was designed to substantially cut manufacturers production costs. The design and cut removes more material per hour, engineered for heavy duty applications, more durable due to the depth of the teeth, more resistant to chipping, wider teeth makes longer chips so it breaks up easier and the teeth profile is less prone to filling up with chips. Not to be used on aluminum.
ALUMINUM CUT: (AC) is for use on aluminum, magnesium, soft steel and non-ferrous materials such as hard plastic, rubber and wood. The wide teeth configuration provides easy chip flow and faster stock removal with little or no clogging. $11.95 |  Dimensions shown are in the following sequence: Head diameter, head length, shank size. Lengths of shank will vary.
EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE: STANDARD CUT:
(STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.
DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
BEAR BUR CUT (BB) is a double cut bur that was designed to substantially cut manufacturers production costs. The design and cut removes more material per hour, engineered for heavy duty applications, more durable due to the depth of the teeth, more resistant to chipping, wider teeth makes longer chips so it breaks up easier and the teeth profile is less prone to filling up with chips. Not to be used on aluminum.
ALUMINUM CUT: (AC) is for use on aluminum, magnesium, soft steel and non-ferrous materials such as hard plastic, rubber and wood. The wide teeth configuration provides easy chip flow and faster stock removal with little or no clogging. $11.95 |
 Dimensions shown are in the following sequence: Head diameter, head length, shank size.
EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:
STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.
DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control. $13.40 |  Dimensions shown are in the following sequence: Head diameter, head length, shank size. Lengths of shank will vary.
EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE: STANDARD CUT:
(STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.
DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
BEAR BUR CUT (BB) is a double cut bur that was designed to substantially cut manufacturers production costs. The design and cut removes more material per hour, engineered for heavy duty applications, more durable due to the depth of the teeth, more resistant to chipping, wider teeth makes longer chips so it breaks up easier and the teeth profile is less prone to filling up with chips. Not to be used on aluminum.
ALUMINUM CUT: (AC) is for use on aluminum, magnesium, soft steel and non-ferrous materials such as hard plastic, rubber and wood. The wide teeth configuration provides easy chip flow and faster stock removal with little or no clogging. $14.15 |
 Dimensions shown are in the following sequence: Head diameter, head length, shank size. Lengths of shank will vary.
EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE: STANDARD CUT:
(STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.
DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
BEAR BUR CUT (BB) is a double cut bur that was designed to substantially cut manufacturers production costs. The design and cut removes more material per hour, engineered for heavy duty applications, more durable due to the depth of the teeth, more resistant to chipping, wider teeth makes longer chips so it breaks up easier and the teeth profile is less prone to filling up with chips. Not to be used on aluminum.
ALUMINUM CUT: (AC) is for use on aluminum, magnesium, soft steel and non-ferrous materials such as hard plastic, rubber and wood. The wide teeth configuration provides easy chip flow and faster stock removal with little or no clogging. $14.15 |  Dimensions shown are in the following sequence: Head diameter, head length, shank size. Lengths of shank will vary.
EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE: STANDARD CUT:
(STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.
DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
BEAR BUR CUT (BB) is a double cut bur that was designed to substantially cut manufacturers production costs. The design and cut removes more material per hour, engineered for heavy duty applications, more durable due to the depth of the teeth, more resistant to chipping, wider teeth makes longer chips so it breaks up easier and the teeth profile is less prone to filling up with chips. Not to be used on aluminum.
ALUMINUM CUT: (AC) is for use on aluminum, magnesium, soft steel and non-ferrous materials such as hard plastic, rubber and wood. The wide teeth configuration provides easy chip flow and faster stock removal with little or no clogging. $19.35 |
 Dimensions shown are in the following sequence: Head diameter, head length, shank size. Lengths of shank will vary.
EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE: STANDARD CUT:
(STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.
DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
BEAR BUR CUT (BB) is a double cut bur that was designed to substantially cut manufacturers production costs. The design and cut removes more material per hour, engineered for heavy duty applications, more durable due to the depth of the teeth, more resistant to chipping, wider teeth makes longer chips so it breaks up easier and the teeth profile is less prone to filling up with chips. Not to be used on aluminum.
ALUMINUM CUT: (AC) is for use on aluminum, magnesium, soft steel and non-ferrous materials such as hard plastic, rubber and wood. The wide teeth configuration provides easy chip flow and faster stock removal with little or no clogging. $19.35 |  Dimensions shown are in the following sequence: Head diameter, head length, shank size. Lengths of shank will vary.
EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE: STANDARD CUT:
(STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.
DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
BEAR BUR CUT (BB) is a double cut bur that was designed to substantially cut manufacturers production costs. The design and cut removes more material per hour, engineered for heavy duty applications, more durable due to the depth of the teeth, more resistant to chipping, wider teeth makes longer chips so it breaks up easier and the teeth profile is less prone to filling up with chips. Not to be used on aluminum.
ALUMINUM CUT: (AC) is for use on aluminum, magnesium, soft steel and non-ferrous materials such as hard plastic, rubber and wood. The wide teeth configuration provides easy chip flow and faster stock removal with little or no clogging. $19.90 |
 Dimensions shown are in the following sequence: Head diameter, head length, shank size. Lengths of shank will vary.
EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE: STANDARD CUT:
(STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.
DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
BEAR BUR CUT (BB) is a double cut bur that was designed to substantially cut manufacturers production costs. The design and cut removes more material per hour, engineered for heavy duty applications, more durable due to the depth of the teeth, more resistant to chipping, wider teeth makes longer chips so it breaks up easier and the teeth profile is less prone to filling up with chips. Not to be used on aluminum.
ALUMINUM CUT: (AC) is for use on aluminum, magnesium, soft steel and non-ferrous materials such as hard plastic, rubber and wood. The wide teeth configuration provides easy chip flow and faster stock removal with little or no clogging. $19.90 |  Dimensions shown are in the following sequence: Head diameter, head length, shank size. Lengths of shank will vary.
EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE: STANDARD CUT:
(STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.
DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
BEAR BUR CUT (BB) is a double cut bur that was designed to substantially cut manufacturers production costs. The design and cut removes more material per hour, engineered for heavy duty applications, more durable due to the depth of the teeth, more resistant to chipping, wider teeth makes longer chips so it breaks up easier and the teeth profile is less prone to filling up with chips. Not to be used on aluminum.
ALUMINUM CUT: (AC) is for use on aluminum, magnesium, soft steel and non-ferrous materials such as hard plastic, rubber and wood. The wide teeth configuration provides easy chip flow and faster stock removal with little or no clogging. $28.15 |
 Dimensions shown are in the following sequence: Head diameter, head length, shank size.
EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:
STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.
DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control. $55.55 |