CARBIDE BUR CYLINDER-INSIDE RING BUR 1/4" HEAD DIA. X 1/2" LENGTH 3/32" SHANK EXTRA FINE CUT
Specifically made for fast deburring, smoothing and finishing of inside ring surfaces. Made of carbide steel for extra long life.
$32.00
Availability: Usually ships the next business day
2001402
CARBIDE BUR CYLINDER-INSIDE RING BUR 1/4" HEAD DIA. X 1/2" LENGTH 3/32" SHANK EXTRA COARSE CUT
Specifically made for fast deburring, smoothing and finishing of inside ring surfaces. Made of carbide steel for extra long life.
$32.00
Availability: Usually ships the next business day
2001403
METAL FINISHING CARBIDE BUR CYLINDER PLAIN END  1/16X1/4X3/32  STANDARD CUT
Dimensions shown are in the following sequence: Head diameter, head length, shank size.

EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:

STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.

DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
$19.03
Availability: Usually ships the next business day
3280902
METAL FINISHING CARBIDE BUR CYLINDER PLAIN END 1/16X1/4X3/32  DOUBLE CUT
Dimensions shown are in the following sequence: Head diameter, head length, shank size.

EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:

STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.

DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
$19.03
Availability: Usually ships the next business day
3280903
METAL FINISHING CARBIDE BUR CYLINDER PLAIN END 5/64X5/16X3/32 STANDARD CUT
Dimensions shown are in the following sequence: Head diameter, head length, shank size. Lengths of shanks will vary.

EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:

STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.

DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
$18.89
Availability: Usually ships the next business day
32810
METAL FINISHING CARBIDE BUR CYLINDER PLAIN END 5/64X5/16X3/32 DOUBLE CUT
Dimensions shown are in the following sequence: Head diameter, head length, shank size. Lengths of shanks will vary.

EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:

STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.

DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
$19.28
Availability: Usually ships the next business day
32811
METAL FINISHING CARBIDE BUR CYLINDER PLAIN END 3/32X3/8X3/32  STANDARD CUT
Dimensions shown are in the following sequence: Head diameter, head length, shank size. Lengths of shanks will vary.

EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:

STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.

DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
$14.88
Availability: Usually ships the next business day
32814
METAL FINISHING CARBIDE BUR CYLINDER PLAIN END 3/32X3/8X3/32  DOUBLE CUT
Dimensions shown are in the following sequence: Head diameter, head length, shank size. Lengths of shanks will vary.

EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:

STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.

DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
$14.88
Availability: Usually ships the next business day
32815
METAL FINISHING CARBIDE BUR CYLINDER RADIUS END 3/32X3/8X3/32  STANDARD CUT
Dimensions shown are in the following sequence: Head diameter, head length, shank size. Lengths of shanks will vary.

EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:

STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.

DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
$16.60
Availability: Usually ships the next business day
32817
METAL FINISHING CARBIDE BUR CYLINDER RADIUS END 3/32X3/8X3/32  DOUBLE CUT
Dimensions shown are in the following sequence: Head diameter, head length, shank size. Lengths of shanks will vary.

EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:

STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.

DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
$17.12
Availability: Usually ships the next business day
32818
METAL FINISHING CARBIDE BUR BALL   3/32X1/8X3/32  STANDARD CUT
Dimensions shown are in the following sequence: Head diameter, head length, shank size. Lengths of shanks will vary.

EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:

STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.

DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
$17.38
Availability: Usually ships the next business day
32820
METAL FINISHING CARBIDE BUR BALL   3/32X1/8X3/32  DOUBLE CUT
Dimensions shown are in the following sequence: Head diameter, head length, shank size. Lengths of shanks will vary.

EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:

STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.

DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
$17.38
Availability: Usually ships the next business day
32821
METAL FINISHING CARBIDE BUR INVERTED CONE 3/32X1/8X3/32 STANDARD CUT
Dimensions shown are in the following sequence: Head diameter, head length, shank size. Lengths of shanks will vary.

EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:

STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.

DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
$17.05
Availability: Usually ships the next business day
32823
METAL FINISHING CARBIDE BUR INVERTED CONE 3/32X1/8X3/32 DOUBLE CUT
Dimensions shown are in the following sequence: Head diameter, head length, shank size. Lengths of shanks will vary.

EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:

STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.

DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
$17.58
Availability: Usually ships the next business day
32824
METAL FINISHING CARBIDE BUR CONE   3/32X5/16X3/32 STANDARD CUT
Dimensions shown are in the following sequence: Head diameter, head length, shank size. Lengths of shanks will vary.

EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:

STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.

DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
$16.14
Availability: Usually ships the next business day
32826
METAL FINISHING CARBIDE BUR CONE   3/32X5/16X3/32 DOUBLE CUT
Dimensions shown are in the following sequence: Head diameter, head length, shank size. Lengths of shanks will vary.

EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:

STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.

DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
$16.14
Availability: Usually ships the next business day
32827
METAL FINISHING CARBIDE BUR OVAL   3/32X1/8X3/32  STANDARD CUT
Dimensions shown are in the following sequence: Head diameter, head length, shank size.

EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:

STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.

DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
$17.36
Availability: Usually ships the next business day
3286102
METAL FINISHING CARBIDE BUR OVAL   3/32X1/8X3/32  DOUBLE CUT
Dimensions shown are in the following sequence: Head diameter, head length, shank size.

EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:

STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.

DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
$17.36
Availability: Usually ships the next business day
3286103
METAL FINISHING CARBIDE BUR TREE POINTED 3/32X1/4X3/32 STANDARD CUT
Dimensions shown are in the following sequence: Head diameter, head length, shank size.

EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:

STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.

DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
$16.20
Availability: Usually ships the next business day
3287902
METAL FINISHING CARBIDE BUR TREE POINTED 3/32X1/4X3/32 DOUBLE CUT
Dimensions shown are in the following sequence: Head diameter, head length, shank size.

EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:

STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.

DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
$16.67
Availability: Usually ships the next business day
3287903
METAL FINISHING CARBIDE BUR TREE RADIUS 3/32X1/4X3/32 STANDARD CUT
Dimensions shown are in the following sequence: Head diameter, head length, shank size.

EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:

STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.

DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
$21.13
Availability: Usually ships the next business day
3288802
METAL FINISHING CARBIDE BUR TREE RADIUS 3/32X1/4X3/32 DOUBLE CUT
Dimensions shown are in the following sequence: Head diameter, head length, shank size.

EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:

STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.

DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
$20.86
Availability: Usually ships the next business day
3288803
CARBIDE BUR CYLINDER 1/4" HEAD 3/32" SHANK
Specifically made for fast deburring, smoothing and finishing of inside ring surfaces. Made of carbide steel for extra long life.
$19.97
Availability: Usually ships the next business day
20211
CARBIDE BUR CYLINDER-INSIDE RING BUR 1/4" HEAD DIA. X 1/2" LENGTH 3/32" SHANK FINE CUT
Specifically made for fast deburring, smoothing and finishing of inside ring surfaces. Made of carbide steel for extra long life.
$32.00
Availability: Usually ships the next business day
2001401



 

SECURE ORDERING

"Shopping with us is 100% Safe and Secure."



Yahoo! Store uses SSL (Secure Socket Layer) encryption when transmitting certain kinds of information, such as financial services information or payment information. Any time a Yahoo! Store asks for a credit card number during checkout for payment, it will be SSL encrypted. The information you provide will be stored securely on our servers.

The Checkout pages for all Yahoo! Stores are served through a secure https connection using 128-bit SSL v2/v3 encryption. You can see the secure server certificate information for our servers by going to the Order Form page and double-clicking on the locked padlock icon in your browser's status bar (at the bottom of the page for most browsers).