METAL FINISHING CARBIDE BUR CYLINDER RADIUS END 1/8X1/2X1/4    STANDARD CUT
Dimensions shown are in the following sequence: Head diameter, head length, shank size.

EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:

STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.

DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
$21.40
Availability: Usually ships the next business day
32606
METAL FINISHING CARBIDE BUR CYLINDER RADIUS END 1/8X1/2X1/4    DOUBLE CUT
Dimensions shown are in the following sequence: Head diameter, head length, shank size.

EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:

STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.

DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
$22.18
Availability: Usually ships the next business day
32607
METAL FINISHING CARBIDE BUR CYLINDER RADIUS END 1/8X5/8X1/4    STANDARD CUT
Dimensions shown are in the following sequence: Head diameter, head length, shank size.

EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:

STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.

DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
$22.22
Availability: Usually ships the next business day
3260702
METAL FINISHING CARBIDE BUR CYLINDER RADIUS END 1/8X5/8X1/4    DOUBLE CUT
Dimensions shown are in the following sequence: Head diameter, head length, shank size.

EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:

STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.

DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
$22.70
Availability: Usually ships the next business day
3260703
METAL FINISHING CARBIDE BUR CYLINDER RADIUS END 5/32X5/8X1/4   STANDARD CUT
Dimensions shown are in the following sequence: Head diameter, head length, shank size.

EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:

STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.

DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
$21.30
Availability: Usually ships the next business day
3260710
METAL FINISHING CARBIDE BUR CYLINDER RADIUS END 5/32X5/8X1/4   DOUBLE CUT
Dimensions shown are in the following sequence: Head diameter, head length, shank size.

EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:

STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.

DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
$21.30
Availability: Usually ships the next business day
3260711
METAL FINISHING CARBIDE BUR CYLINDER RADIUS END 3/16X5/8X1/4   STANDARD CUT
Dimensions shown are in the following sequence: Head diameter, head length, shank size.

EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:

STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.

DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
$23.82
Availability: Usually ships the next business day
32609
METAL FINISHING CARBIDE BUR CYLINDER RADIUS END 3/16X5/8X1/4   DOUBLE CUT
Dimensions shown are in the following sequence: Head diameter, head length, shank size.

EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:

STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.

DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
$21.92
Availability: Usually ships the next business day
32610
METAL FINISHING CARBIDE BUR CYLINDER RADIUS END 1/4X5/8X1/4    STANDARD CUT
Dimensions shown are in the following sequence: Head diameter, head length, shank size.

EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:

STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.

DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
$22.72
Availability: Usually ships the next business day
32612
METAL FINISHING CARBIDE BUR CYLINDER RADIUS END 1/4X5/8X1/4    DOUBLE CUT
Dimensions shown are in the following sequence: Head diameter, head length, shank size.

EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:

STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.

DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
$22.72
Availability: Usually ships the next business day
32613
METAL FINISHING CARBIDE BUR CYLINDER RADIUS END 1/4X1X1/4      STANDARD CUT
Dimensions shown are in the following sequence: Head diameter, head length, shank size.

EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:

STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.

DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
$24.22
Availability: Usually ships the next business day
3261302
METAL FINISHING CARBIDE BUR CYLINDER RADIUS END 1/4X1X1/4      DOUBLE CUT
Dimensions shown are in the following sequence: Head diameter, head length, shank size.

EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:

STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.

DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
$24.22
Availability: Usually ships the next business day
3261303
METAL FINISHING CARBIDE BUR CYLINDER RADIUS END 5/16X3/4X1/4   STANDARD CUT
Dimensions shown are in the following sequence: Head diameter, head length, shank size.

EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:

STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.

DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
$24.94
Availability: Usually ships the next business day
32615
METAL FINISHING CARBIDE BUR CYLINDER RADIUS END 5/16X3/4X1/4   DOUBLE CUT
Dimensions shown are in the following sequence: Head diameter, head length, shank size.

EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:

STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.

DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
$25.45
Availability: Usually ships the next business day
32616
METAL FINISHING CARBIDE BUR CYLINDER RADIUS END 3/8X3/4X1/4    STANDARD CUT
Dimensions shown are in the following sequence: Head diameter, head length, shank size.

EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:

STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.

DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
$24.29
Availability: Usually ships the next business day
32618
METAL FINISHING CARBIDE BUR CYLINDER RADIUS END 3/8X3/4X1/4    DOUBLE CUT
Dimensions shown are in the following sequence: Head diameter, head length, shank size.

EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:

STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.

DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
$25.00
Availability: Usually ships the next business day
32619
METAL FINISHING CARBIDE BUR CYLINDER RADIUS END 3/8X1X1/4      STANDARD CUT
Dimensions shown are in the following sequence: Head diameter, head length, shank size.

EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:

STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.

DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
$28.22
Availability: Usually ships the next business day
3261902
METAL FINISHING CARBIDE BUR CYLINDER RADIUS END 3/8X1X1/4      DOUBLE CUT
Dimensions shown are in the following sequence: Head diameter, head length, shank size.

EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:

STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.

DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
$28.61
Availability: Usually ships the next business day
3261903
METAL FINISHING CARBIDE BUR CYLINDER RADIUS END 3/8X1-1/2X1/4  STANDARD CUT
Dimensions shown are in the following sequence: Head diameter, head length, shank size.

EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:

STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.

DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
$36.73
Availability: Usually ships the next business day
3261910
METAL FINISHING CARBIDE BUR CYLINDER RADIUS END 3/8X1-1/2X1/4  DOUBLE CUT
Dimensions shown are in the following sequence: Head diameter, head length, shank size.

EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:

STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.

DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
$41.35
Availability: Usually ships the next business day
3261911
METAL FINISHING CARBIDE BUR CYLINDER RADIUS END 7/16X1X1/4     STANDARD CUT
Dimensions shown are in the following sequence: Head diameter, head length, shank size.

EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:

STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.

DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
$30.46
Availability: Usually ships the next business day
3261912
METAL FINISHING CARBIDE BUR CYLINDER RADIUS END 7/16X1X1/4     DOUBLE CUT
Dimensions shown are in the following sequence: Head diameter, head length, shank size.

EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:

STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.

DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
$31.12
Availability: Usually ships the next business day
3261913
METAL FINISHING CARBIDE BUR CYLINDER RADIUS END 1/2X1X1/4      STANDARD CUT
Dimensions shown are in the following sequence: Head diameter, head length, shank size.

EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:

STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.

DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
$34.06
Availability: Usually ships the next business day
32621
METAL FINISHING CARBIDE BUR CYLINDER RADIUS END 1/2X1X1/4      DOUBLE CUT
Dimensions shown are in the following sequence: Head diameter, head length, shank size.

EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:

STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.

DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
$33.22
Availability: Usually ships the next business day
32622
METAL FINISHING CARBIDE BUR CYLINDER RADIUS END 5/8X1X1/4      STANDARD CUT
Dimensions shown are in the following sequence: Head diameter, head length, shank size.

EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:

STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.

DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
$40.69
Availability: Usually ships the next business day
32624
METAL FINISHING CARBIDE BUR CYLINDER RADIUS END 5/8X1X1/4      DOUBLE CUT
Dimensions shown are in the following sequence: Head diameter, head length, shank size.

EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:

STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.

DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
$41.35
Availability: Usually ships the next business day
32625
METAL FINISHING CARBIDE BUR CYLINDER RADIUS END 3/4X1/2X1/4    STANDARD CUT
Dimensions shown are in the following sequence: Head diameter, head length, shank size.

EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:

STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.

DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
$50.09
Availability: Usually ships the next business day
3262502
METAL FINISHING CARBIDE BUR CYLINDER RADIUS END 3/4X1/2X1/4    DOUBLE CUT
Dimensions shown are in the following sequence: Head diameter, head length, shank size.

EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:

STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.

DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
$51.86
Availability: Usually ships the next business day
3262503
METAL FINISHING CARBIDE BUR CYLINDER RADIUS END 3/4X3/4X1/4    STANDARD CUT
Dimensions shown are in the following sequence: Head diameter, head length, shank size.

EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:

STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.

DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
$47.58
Availability: Usually ships the next business day
3262510
METAL FINISHING CARBIDE BUR CYLINDER RADIUS END 3/4X3/4X1/4    DOUBLE CUT
Dimensions shown are in the following sequence: Head diameter, head length, shank size.

EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:

STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.

DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
$54.89
Availability: Usually ships the next business day
3262511
METAL FINISHING CARBIDE BUR CYLINDER RADIUS END 3/4X1X1/4      STANDARD CUT
Dimensions shown are in the following sequence: Head diameter, head length, shank size.

EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:

STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.

DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
$58.18
Availability: Usually ships the next business day
32627
METAL FINISHING CARBIDE BUR CYLINDER RADIUS END 3/4X1X1/4      DOUBLE CUT
Dimensions shown are in the following sequence: Head diameter, head length, shank size.

EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:

STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.

DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
$60.73
Availability: Usually ships the next business day
32628
METAL FINISHING CARBIDE BUR CYLINDER RADIUS END 1X1X1/4        STANDARD CUT
Dimensions shown are in the following sequence: Head diameter, head length, shank size.

EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:

STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.

DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
$81.17
Availability: Usually ships the next business day
3262802



 

SECURE ORDERING

"Shopping with us is 100% Safe and Secure."



Yahoo! Store uses SSL (Secure Socket Layer) encryption when transmitting certain kinds of information, such as financial services information or payment information. Any time a Yahoo! Store asks for a credit card number during checkout for payment, it will be SSL encrypted. The information you provide will be stored securely on our servers.

The Checkout pages for all Yahoo! Stores are served through a secure https connection using 128-bit SSL v2/v3 encryption. You can see the secure server certificate information for our servers by going to the Order Form page and double-clicking on the locked padlock icon in your browser's status bar (at the bottom of the page for most browsers).