METAL FINISHING CARBIDE BUR CYLINDER PLAIN END 1/8X1/2X1/4    STANDARD CUT
Dimensions shown are in the following sequence: Head diameter, head length, shank size.

EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:

STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.

DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
$33.72
Availability: Usually ships the next business day
32540
METAL FINISHING CARBIDE BUR CYLINDER PLAIN END 1/8X1/2X1/4    DOUBLE CUT
Dimensions shown are in the following sequence: Head diameter, head length, shank size.

EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:

STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.

DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
$22.50
Availability: Usually ships the next business day
32541
METAL FINISHING CARBIDE BUR CYLINDER PLAIN END 1/8X5/8X1/4    STANDARD CUT
Dimensions shown are in the following sequence: Head diameter, head length, shank size.

EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:

STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.

DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
$20.99
Availability: Usually ships the next business day
3254102
METAL FINISHING CARBIDE BUR CYLINDER PLAIN END 1/8X5/8X1/4    DOUBLE CUT
Dimensions shown are in the following sequence: Head diameter, head length, shank size.

EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:

STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.

DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
$21.46
Availability: Usually ships the next business day
3254103
METAL FINISHING CARBIDE BUR CYLINDER PLAIN END 5/32X5/8X1/4   STANDARD CUT
Dimensions shown are in the following sequence: Head diameter, head length, shank size.

EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:

STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.

DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
$19.54
Availability: Usually ships the next business day
3254110
METAL FINISHING CARBIDE BUR CYLINDER PLAIN END 3/16X5/8X1/4   STANDARD CUT
Dimensions shown are in the following sequence: Head diameter, head length, shank size.

EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:

STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.

DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
$20.34
Availability: Usually ships the next business day
32543
METAL FINISHING CARBIDE BUR CYLINDER PLAIN END 3/16X5/8X1/4   DOUBLE CUT
Dimensions shown are in the following sequence: Head diameter, head length, shank size.

EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:

STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.

DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
$20.99
Availability: Usually ships the next business day
32544
METAL FINISHING CARBIDE BUR CYLINDER PLAIN END 1/4X5/8X1/4    STANDARD CUT
Dimensions shown are in the following sequence: Head diameter, head length, shank size.

EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:

STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.

DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
$18.24
Availability: Usually ships the next business day
32546
METAL FINISHING CARBIDE BUR CYLINDER PLAIN END 1/4X5/8X1/4    DOUBLE CUT
Dimensions shown are in the following sequence: Head diameter, head length, shank size.

EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:

STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.

DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
$18.62
Availability: Usually ships the next business day
32547
METAL FINISHING CARBIDE BUR CYLINDER PLAIN END 1/4X1X1/4      STANDARD CUT
Dimensions shown are in the following sequence: Head diameter, head length, shank size.

EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:

STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.

DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
$24.54
Availability: Usually ships the next business day
3254702
METAL FINISHING CARBIDE BUR CYLINDER PLAIN END 1/4X1X1/4      DOUBLE CUT
Dimensions shown are in the following sequence: Head diameter, head length, shank size.

EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:

STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.

DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
$24.54
Availability: Usually ships the next business day
3254703
METAL FINISHING CARBIDE BUR CYLINDER PLAIN END 5/16X3/4X1/4   STANDARD CUT
Dimensions shown are in the following sequence: Head diameter, head length, shank size.

EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:

STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.

DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
$23.03
Availability: Usually ships the next business day
32549
METAL FINISHING CARBIDE BUR CYLINDER PLAIN END 5/16X3/4X1/4   DOUBLE CUT
Dimensions shown are in the following sequence: Head diameter, head length, shank size.

EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:

STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.

DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
$23.76
Availability: Usually ships the next business day
32550
METAL FINISHING CARBIDE BUR CYLINDER PLAIN END 3/8X3/4X1/4    STANDARD CUT
Dimensions shown are in the following sequence: Head diameter, head length, shank size.

EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:

STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.

DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
$23.82
Availability: Usually ships the next business day
32552
METAL FINISHING CARBIDE BUR CYLINDER PLAIN END 3/8X3/4X1/4    DOUBLE CUT
Dimensions shown are in the following sequence: Head diameter, head length, shank size.

EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:

STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.

DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
$23.29
Availability: Usually ships the next business day
32553
METAL FINISHING CARBIDE BUR CYLINDER PLAIN END 3/8X1X1/4      STANDARD CUT
Dimensions shown are in the following sequence: Head diameter, head length, shank size.

EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:

STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.

DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
$28.22
Availability: Usually ships the next business day
3255302
METAL FINISHING CARBIDE BUR CYLINDER PLAIN END 3/8X1X1/4      DOUBLE CUT
Dimensions shown are in the following sequence: Head diameter, head length, shank size.

EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:

STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.

DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
$28.87
Availability: Usually ships the next business day
3255303
METAL FINISHING CARBIDE BUR CYLINDER PLAIN END 3/8X1-1/2X1/4  STANDARD CUT
Dimensions shown are in the following sequence: Head diameter, head length, shank size.

EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:

STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.

DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
$29.99
Availability: Usually ships the next business day
3255310
METAL FINISHING CARBIDE BUR CYLINDER PLAIN END 3/8X1-1/2X1/4  DOUBLE CUT
Dimensions shown are in the following sequence: Head diameter, head length, shank size.

EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:

STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.

DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
$33.28
Availability: Usually ships the next business day
3255311
METAL FINISHING CARBIDE BUR CYLINDER PLAIN END 7/16X1X1/4     STANDARD CUT
Dimensions shown are in the following sequence: Head diameter, head length, shank size.

EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:

STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.

DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
$30.67
Availability: Usually ships the next business day
3255320
METAL FINISHING CARBIDE BUR CYLINDER PLAIN END 7/16X1X1/4     DOUBLE CUT
Dimensions shown are in the following sequence: Head diameter, head length, shank size.

EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:

STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.

DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
$34.58
Availability: Usually ships the next business day
3255321
METAL FINISHING CARBIDE BUR CYLINDER PLAIN END 1/2X1X1/4      STANDARD CUT
Dimensions shown are in the following sequence: Head diameter, head length, shank size.

EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:

STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.

DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
$31.24
Availability: Usually ships the next business day
32555
METAL FINISHING CARBIDE BUR CYLINDER PLAIN END 1/2X1X1/4      DOUBLE CUT
Dimensions shown are in the following sequence: Head diameter, head length, shank size.

EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:

STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.

DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
$32.17
Availability: Usually ships the next business day
32556
METAL FINISHING CARBIDE BUR CYLINDER PLAIN END 5/8X1X1/4      STANDARD CUT
Dimensions shown are in the following sequence: Head diameter, head length, shank size.

EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:

STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.

DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
$38.21
Availability: Usually ships the next business day
32558
METAL FINISHING CARBIDE BUR CYLINDER PLAIN END 5/8X1X1/4      DOUBLE CUT
Dimensions shown are in the following sequence: Head diameter, head length, shank size.

EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:

STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.

DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
$38.46
Availability: Usually ships the next business day
32559
METAL FINISHING CARBIDE BUR CYLINDER PLAIN END 3/4X1/2X1/4    STANDARD CUT
Dimensions shown are in the following sequence: Head diameter, head length, shank size.

EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:

STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.

DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
$51.66
Availability: Usually ships the next business day
3255902
METAL FINISHING CARBIDE BUR CYLINDER PLAIN END 3/4X1/2X1/4    DOUBLE CUT
Dimensions shown are in the following sequence: Head diameter, head length, shank size.

EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:

STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.

DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
$53.45
Availability: Usually ships the next business day
3255903
METAL FINISHING CARBIDE BUR CYLINDER PLAIN END 3/4X3/4X1/4    STANDARD CUT
Dimensions shown are in the following sequence: Head diameter, head length, shank size.

EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:

STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.

DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
$55.81
Availability: Usually ships the next business day
32561
METAL FINISHING CARBIDE BUR CYLINDER PLAIN END 3/4X3/4X1/4    DOUBLE CUT
Dimensions shown are in the following sequence: Head diameter, head length, shank size.

EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:

STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.

DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
$56.74
Availability: Usually ships the next business day
32562
METAL FINISHING CARBIDE BUR CYLINDER PLAIN END 3/4X1X1/4      STANDARD CUT
Dimensions shown are in the following sequence: Head diameter, head length, shank size.

EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:

STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.

DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
$53.23
Availability: Usually ships the next business day
32564
METAL FINISHING CARBIDE BUR CYLINDER PLAIN END 3/4X1X1/4      DOUBLE CUT
Dimensions shown are in the following sequence: Head diameter, head length, shank size.

EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:

STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.

DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
$54.10
Availability: Usually ships the next business day
32565
METAL FINISHING CARBIDE BUR CYLINDER PLAIN END 7/8X1X1/4      STANDARD CUT
Dimensions shown are in the following sequence: Head diameter, head length, shank size.

EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:

STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.

DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
$88.72
Availability: Usually ships the next business day
3256502
METAL FINISHING CARBIDE BUR CYLINDER PLAIN END 7/8X1X1/4      DOUBLE CUT
Dimensions shown are in the following sequence: Head diameter, head length, shank size.

EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:

STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.

DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
$91.99
Availability: Usually ships the next business day
3256503
METAL FINISHING CARBIDE BUR CYLINDER PLAIN END 1X1X1/4        STANDARD CUT
Dimensions shown are in the following sequence: Head diameter, head length, shank size.

EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:

STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.

DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
$71.05
Availability: Usually ships the next business day
32567
METAL FINISHING CARBIDE BUR CYLINDER PLAIN END 1X1X1/4        DOUBLE CUT
Dimensions shown are in the following sequence: Head diameter, head length, shank size.

EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:

STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.

DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
$71.70
Availability: Usually ships the next business day
32568



 

SECURE ORDERING

"Shopping with us is 100% Safe and Secure."



Yahoo! Store uses SSL (Secure Socket Layer) encryption when transmitting certain kinds of information, such as financial services information or payment information. Any time a Yahoo! Store asks for a credit card number during checkout for payment, it will be SSL encrypted. The information you provide will be stored securely on our servers.

The Checkout pages for all Yahoo! Stores are served through a secure https connection using 128-bit SSL v2/v3 encryption. You can see the secure server certificate information for our servers by going to the Order Form page and double-clicking on the locked padlock icon in your browser's status bar (at the bottom of the page for most browsers).